We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft power extension cord with C14 male plug and C19 female socket, SJT jacketed 14 AWG cable

Cable Leader

Cable Leader 8ft C14 to C19 14 AWG 15A 250V Black Power Extension Cord

SKU CH-2WSD-2APA9

An 8 ft C14-to-C19 extension adds reach between PDU, UPS or server and existing cord, using 14 AWG 15 A 250 V SJT copper that is UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14-to-C19 reach by 8 ft between PDU and server
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for rack loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • UL Listed and CSA certified (file E210037), RoHS compliant
  • Black jacket simplifies circuit and phase identification in the rack

Extends C14-to-C19 Power Reach

This eight-foot cord adds length between a rack PDU, UPS or server and an existing C19-terminated power cord. The male IEC 60320 C14 plug connects to the power source while the female C19 socket accepts the equipment cord, removing the need for a separate adapter. It suits data-centre racks, server rooms and AV installations that use standard IEC 60320 connectors.

Heavy-Duty 14 AWG Construction

Three-conductor grounded copper at 14 AWG is rated for 15 A at 250 V, with an SJT jacket rated to 105 °C and 300 V. The gauge supports higher-draw equipment such as servers and PDUs, whereas lighter 18 AWG or 16 AWG cords are limited to 10 A or 13 A respectively. The black jacket aids visual circuit tracing in dense rack environments.

Safety-Certified for Continuous Use

UL Listed and CSA certified under file E210037, the cord meets RoHS requirements for hazardous-substance compliance. The robust SJT sheathing and grounded conductors maintain safe operation under sustained server loads without excess heat or voltage drop. Not intended for 20 A circuits that require 12 AWG or for devices using non-IEC connector types.

Highlights

  • Extends C14-to-C19 reach by 8 ft between PDU and server
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for rack loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • UL Listed and CSA certified (file E210037), RoHS compliant
  • Black jacket simplifies circuit and phase identification in the rack

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

What is the continuous current limit for the 14 AWG conductors on this cord?

The 14 AWG, 3-conductor copper is rated for 15 A at 250 V, so sustained loads must stay at or below 15 A.

How warm does the SJT jacket get when the cord carries a full 15 A load all day?

The jacket is rated to 105 °C, so under continuous 15 A operation the surface temperature can approach that limit inside a warm rack.

What mating connector must already be on the equipment cord to plug into the female C19 end?

The equipment cord needs a male IEC 60320 C19 plug to mate with the C19 socket on this extension.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.