We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 72-inch Y power splitter cord with angled low-profile plug and two straight outlets

Cable Leader

Cable Leader 72in 5-15P Low Profile Angled to 2x 5-15R Power Splitter Cord 14 AWG 15A 125V Black

SKU CH-A06N-4RZ5D

A 72-inch Y-cable splits one low-profile angled 5-15P plug into two 5-15R outlets using 14 AWG grounded SJT cable rated 15A at 125V

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 72in

  • Powers two devices from one outlet with a single 5-15P to dual 5-15R splitter
  • Heavy-duty 14 AWG copper conductors rated 15 A at 125 V for servers and PDUs
  • Low-profile angled plug fits tight spaces behind desks or racks
  • Fully grounded 3-wire design with molded strain relief for safe, reliable connections
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

One-to-two power splitter

This 72-inch cord splits a single NEMA 5-15P low-profile angled plug into two NEMA 5-15R receptacles. It lets you power two devices from one wall outlet or PDU port. The Y-style layout keeps cable runs short and tidy behind desks or racks.

Heavy-duty grounded construction

The cord uses 14 AWG three-conductor copper with an SJT jacket rated 105 °C and 300 V. Molded connectors and built-in strain relief protect the joints during frequent repositioning. UL Listed and CSA certified under file E210037, plus RoHS compliant.

15-ampere 125-volt capacity

The 14 AWG gauge supports continuous loads up to 15 A at 125 V, suitable for PCs, monitors, servers and similar equipment. Total draw across both outlets must stay within this rating. Not suited for circuits or devices that require 20 A or higher amperage.

Highlights

  • Powers two devices from one outlet with a single 5-15P to dual 5-15R splitter
  • Heavy-duty 14 AWG copper conductors rated 15 A at 125 V for servers and PDUs
  • Low-profile angled plug fits tight spaces behind desks or racks
  • Fully grounded 3-wire design with molded strain relief for safe, reliable connections
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the NEMA 5-15P low-profile angled plug cap in practice?

The plug is rated for 15 A at 125 V, so the combined draw of both connected devices must stay within that 15 A limit.

How much clearance does the angled plug need behind the outlet?

The low-profile angled head sits close to the wall, letting furniture or racks sit flush while still leaving room for the two 5-15R branches.

How do I install the splitter without overloading the circuit?

Plug the single 5-15P end into the wall, then connect both devices to the 5-15R ends, making sure the total load stays at or below 15 A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.