We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 6 ft IEC C20 to C19 heavy duty power extension cord with SJT jacket

Cable Leader

Cable Leader 6ft IEC C20 to C19 Heavy Duty Power Extension Cord 12 AWG 20A 250V Yellow

SKU CH-97KB-06MX6

A 6 ft heavy-duty 12 AWG extension with male C20 plug and female C19 socket extends server or PDU power runs at 20A / 250V, SJT jacketed and UL Listed, in yellow for rack colour-coding

  • ColorYellow
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge12 AWG
  • Extends C20/C19 power connections without adapters
  • Heavy-duty 12 AWG copper handles 20A at 250V
  • SJT jacket rated 105C and 300V for rack loads
  • Yellow colour helps trace circuits and phases quickly
  • UL Listed and CSA certified file E210037, RoHS compliant

Extends C20 to C19 power

This yellow 6 ft extension cord connects a male IEC 60320 C20 plug to a female C19 socket, adding reach between a rack PDU, UPS or server and your existing power cord. It uses heavy duty 12 AWG SJT-jacketed copper rated for 20A at 250V with a 105C / 300V cable rating. UL Listed and CSA certified (file E210037), RoHS compliant.

Replaces short factory cords

When the stock cable from a server, switch or AV device cannot reach the PDU, this 12 AWG jumper closes the gap without an adapter. The 20A rating makes it suitable for 20A equipment, whereas 18 AWG handles up to 10A, 16 AWG up to 13A and 14 AWG up to 15A for lower-draw gear.

C19/C20 interface limits

The IEC 60320 C19/C20 connectors are standard on rack PDUs and high-draw servers but do not fit common C13/C14 inlets found on most desktop PCs and monitors. Builders needing to extend a C13/C14 connection or requiring a different amperage rating must choose a cord with matching connectors and gauge.

Highlights

  • Extends C20/C19 power connections without adapters
  • Heavy-duty 12 AWG copper handles 20A at 250V
  • SJT jacket rated 105C and 300V for rack loads
  • Yellow colour helps trace circuits and phases quickly
  • UL Listed and CSA certified file E210037, RoHS compliant

Specifications

BrandGENERIC
ColorYellow
Length5 - 10 ft.
Connector Number2
Wire Gauge12 AWG

Questions about this item

What clearance does the IEC 60320 C20 plug and C19 socket need inside a rack?

Both connectors follow the IEC 60320 standard used on rack PDUs, UPS units and servers, so they fit the same panel cut-outs as any C20/C19 pair.

How do I install the cord without creating a loose connection?

Push the male C20 plug fully into the PDU or UPS outlet until it seats, then insert the existing cord's C19 plug into the female end until it clicks — partial insertion is the common mistake.

When should I replace this 12 AWG SJT extension cord?

Inspect the yellow jacket periodically; replace the cord if the insulation shows cracks, discolouration from 105C heat exposure, or if the C19 socket grips a plug loosely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.