We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft IEC C20 to C19 power extension cord with thick SJT jacket

Cable Leader

Cable Leader 6ft IEC C20 to C19 14 AWG 15A 250V Black Power Extension Cord

SKU CH-WADS-S4DRA

Extends a C20/C19 power link with a 14 AWG, 15 A / 250 V SJT cable that is UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends reach between PDU and server with male C20 to female C19 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server and rack loads
  • SJT jacket rated 105C and 300V withstands demanding data-centre environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Black jacket enables quick circuit and phase identification in dense rack installations

Extending C20/C19 power connections

This six-foot cord adds reach between a rack PDU, UPS or server and your existing C19 power cable. The male C20 plug connects to the power source while the female C19 socket accepts your equipment cord without any adapter. Heavy-duty 14 AWG copper conductors with an SJT jacket are rated for 15A at 250V and 105C. UL Listed and CSA certified construction suits server, switch and AV rack installations.

Replacing shorter or lighter-gauge jumpers

When the factory cord falls short of the PDU or a thinner 16 AWG or 18 AWG cable cannot carry the load, this 14 AWG extension steps in. The jump is worth it for 15A server and PDU feeds where 16 AWG tops out at 13A and 18 AWG at 10A. Black jacket colour-coding helps trace circuits and phases at a glance. Lifetime replacement backing from the US-based brand covers failures in permanent rack deployments.

15A headroom for rack and data-centre loads

The 14 AWG, three-conductor grounded copper comfortably handles continuous 15A at 250V for servers, switches and high-draw AV gear. It runs out at the 15A limit; 20A circuits require 12 AWG instead. The 300V cable rating and 105C temperature rating provide margin above the 250V working voltage. Not for buyers who need longer runs beyond six feet or a different connector pairing such as C14 to C13.

Highlights

  • Extends reach between PDU and server with male C20 to female C19 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server and rack loads
  • SJT jacket rated 105C and 300V withstands demanding data-centre environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Black jacket enables quick circuit and phase identification in dense rack installations

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

How much clearance does the C20 plug and C19 socket need behind a rack PDU?

The 6 ft cord uses standard IEC 60320 C20 and C19 connectors; allow roughly 50 mm behind the PDU for the plug body and the same for the socket so cables route without sharp bends.

What is the correct way to seat the C20 plug into a PDU and the step most people miss?

Align the keyed C20 pins with the PDU outlet, push straight in until the latch clicks, then tug gently to confirm lock — skipping the click check is the common mistake.

When should this 14 AWG SJT extension cord be replaced in a server rack?

Inspect yearly; replace if the jacket shows cracking, discoloration from 105C heat exposure, connector pins are bent, or the UL Listed E210037 label becomes illegible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.