Cable Leader
Cable Leader 6ft IEC C14 to C13 14 AWG 15A 250V Computer Power Extension Cord
A 6 ft heavy-duty 14 AWG extension cord adds reach between a C14 plug and C13 socket for server, PDU and UPS connections at 15 A / 250 V, with UL and CSA certification
- FeaturesThis 6ft power extension cord is made by Cable Leader and fe
- Extends reach between PDU and server with male C14 to female C13 connectors
- Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
- SJT jacket rated 105 °C and 300 V withstands rack heat
- UL Listed and CSA certified (file E210037) plus RoHS compliant
- Black jacket simplifies circuit and phase identification in dense racks
6 ft C14-to-C13 extension for rack power
This six-foot cord adds reach between a rack PDU, UPS or server and an existing C13 power cord. The male C14 plug and female C13 socket follow the IEC 60320 standard used across servers, switches and AV gear. A black SJT jacket helps trace circuits and phases at a glance. The cable is UL Listed, CSA certified and RoHS compliant.
14 AWG replaces thinner cords for higher draw
An 18 AWG cord handles up to 10 A for light electronics; 16 AWG reaches 13 A for computers. Stepping to this 14 AWG, 15 A / 250 V cable is worth it when the load exceeds those limits, such as on PDU branches or server supplies. The 105 °C / 300 V cable rating gives headroom for continuous operation in warm racks.
15 A capacity suits most rack gear.
The 14 AWG copper conductors comfortably carry the 15 A rating for typical servers, switches and storage units on a C13 branch. For equipment that demands 20 A, a 12 AWG cord is required instead. This extension does not increase the ampacity of the upstream circuit or connector. It simply extends the existing C14/C13 link with heavier gauge wire.
Highlights
- Extends reach between PDU and server with male C14 to female C13 connectors
- Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
- SJT jacket rated 105 °C and 300 V withstands rack heat
- UL Listed and CSA certified (file E210037) plus RoHS compliant
- Black jacket simplifies circuit and phase identification in dense racks
Specifications
| Brand | Cable Leader |
|---|---|
| Features | This 6ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 15 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries. |
Questions about this item
How long is the cable and what clearance does the C14 plug need behind a rack PDU?
The cord is six feet long with a standard IEC 60320 C14 male plug and C13 female socket; allow enough depth for the plug body to seat fully in the PDU outlet without strain on the SJT jacket.
What is the step people miss when seating the C14 into a PDU or UPS?
Push the C14 plug straight in until it seats firmly in the IEC 60320 outlet; the connector relies on a friction fit rather than a locking latch, so a partial insert can leave the circuit open.
Does the 14 AWG SJT jacket need any periodic inspection or replacement?
The cord is UL Listed and CSA certified with a 105C, 300V rated SJT jacket; inspect it visually for cuts, crush damage or discoloration after any rack rework and replace if the jacket is compromised.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114501BTC
In stock
