We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with LC connectors on both ends, 5 metre length

Cable Leader

Cable Leader 5m 16ft OM1 LC LC Duplex 62.5 125 Orange

SKU CH-GY4H-0KFH3

OM1 multimode duplex fiber patch cable with LC/UPC connectors, 5 m length, Corning fiber, OFNR jacket, supports 1G and 10G short-reach links

  • ColorOrange
  • Length16 - 20 ft.
  • Connector Number2
  • Reliable 10G short-reach links over OM1 multimode fiber
  • Genuine Corning fiber ensures consistent optical performance
  • LC/UPC ceramic ferrules with push-pull latching for secure, low-loss mating
  • OFNR riser-rated orange jacket safe for in-building and data center runs
  • 5m duplex jumper connects SFP, SFP+, QSFP transceivers and patch panels

5m OM1 LC duplex patch cable

The Cable Leader 5m OM1 LC duplex patch cable is a multimode fiber jumper built on genuine Corning optical fiber for consistent performance. Its orange OFNR riser-rated jacket is suited to in-building and data center installations. LC/UPC ceramic ferrule connectors provide secure, low-loss mating with push-pull latching. The duplex construction keeps transmit and receive fibers correctly paired.

Replaces older OM1 or legacy 62.5µm jumpers

This cable replaces older OM1 or legacy 62.5µm jumpers when a factory-terminated, Corning-based assembly with OFNR rating is required. The upgrade is worth it when existing patch cords show high insertion loss, damaged ferrules, or lack riser-rated jackets for in-wall runs. It also fits installations moving to LC/UPC interfaces from SC or ST connectors while staying on OM1 infrastructure.

Handles 1G and 10G short-reach links

The cable comfortably handles 1000BASE-SX and 10GBASE-SR links over multimode fiber within OM1 distance limits. It runs out when link distances exceed the OM1 reach for 10G, when higher bandwidth OM3 or OM4 grades are specified, or when single-mode fiber is required for longer campus or metro connections.

Highlights

  • Reliable 10G short-reach links over OM1 multimode fiber
  • Genuine Corning fiber ensures consistent optical performance
  • LC/UPC ceramic ferrules with push-pull latching for secure, low-loss mating
  • OFNR riser-rated orange jacket safe for in-building and data center runs
  • 5m duplex jumper connects SFP, SFP+, QSFP transceivers and patch panels

Specifications

BrandGENERIC
ColorOrange
Length16 - 20 ft.
Connector Number2

Questions about this item

What patch-panel spacing does the 16 ft LC duplex cable need?

The 5 m (16 ft) orange OFNR jacket reaches across standard rack rows; allow enough slack so the duplex zipcord is not bent tighter than the cable’s minimum bend radius.

Which cleaning step is often skipped when mating the LC/UPC ceramic ferrules?

Inspect and clean both 62.5/125 µm end-faces with a lint-free wipe and isopropyl alcohol before every insertion to prevent contamination-induced loss.

When should the OM1 jumper be replaced in a 10GBASE-SR link?

Replace the Corning-fiber cable if insertion loss exceeds the link budget, the jacket shows cracks, or the push-pull latch no longer holds securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.