We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5-foot power extension cord with IEC C14 male plug and C13 female socket

Cable Leader

Cable Leader 5ft IEC C14 to C13 Power Extension Cord 18 AWG 10A 250V Black

SKU CH-8K6T-C3RKN

Extends a C14/C13 power link by 5 ft with 18 AWG 10 A 250 V SJT cable, IEC 60320 connectors, UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 5ft

Struck-through versions exist but are not stocked here.

  • Extends C14/C13 reach by 5 ft without adapters
  • 18 AWG copper handles 10 A at 250 V
  • UL Listed and CSA certified (file E210037)
  • Black SJT jacket simplifies rack circuit tracing
  • IEC 60320 connectors fit standard PDU and server gear

Extends C14/C13 power reach

This 5 ft black extension cord bridges the gap between a rack PDU or UPS and your existing C13 cable. The male C14 plug connects to the power source while the female C13 socket accepts your equipment cord directly. It is intended for server, network and AV racks where the factory lead falls short.

18 AWG limits at 10 A / 250 V

The 18 AWG SJT jacketed copper conductors are rated for a maximum of 10 A at 250 V, with a cable temperature rating of 105 °C and 300 V insulation. This gauge suits light electronics and low-draw servers; heavier loads require thicker conductors such as 16 AWG for 13 A, 14 AWG for 15 A or 12 AWG for 20 A circuits.

UL Listed build with colour-coded jacket

The cord carries UL Listing and CSA certification under file E210037 and meets RoHS requirements. The black SJT jacket resists heat and abrasion while helping technicians trace phases at a glance in dense racks. Standard IEC 60320 C14 and C13 connectors lock securely into PDUs, UPS units and server power supplies.

Highlights

  • Extends C14/C13 reach by 5 ft without adapters
  • 18 AWG copper handles 10 A at 250 V
  • UL Listed and CSA certified (file E210037)
  • Black SJT jacket simplifies rack circuit tracing
  • IEC 60320 connectors fit standard PDU and server gear

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick 18 AWG or a thicker gauge for my rack?

18 AWG supports 10 A at 250 V; 16 AWG reaches 13 A, 14 AWG 15 A, 12 AWG 20 A — match the cord to the load

What does the 10 A / 250 V rating mean once the cord is plugged into my PDU?

It means the 18 AWG SJT cable can continuously carry 10 A at up to 250 V without exceeding its 105 °C temperature rating

Does the IEC 60320 C14-to-C13 connection limit the current I can draw?

The connectors are rated for the same 10 A / 250 V as the cable, so the assembly caps at 10 A in practice

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.