We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 15ft IEC C14 to C13 Power Extension Cord 18 AWG 10A/250V Black jhcex-627

SKU CH-1FD5-S594S

Extends a C14-to-C13 power link by 15 ft with 18 AWG SJT copper rated 10 A / 250 V, UL and CSA listed, black jacket

  • FeaturesThis 15ft power extension cord is made by Cable Leader and f

Length 15ft

Struck-through versions exist but are not stocked here.

  • Extends reach between PDU and server with 15ft C14 to C13 cord
  • 18 AWG SJT copper handles 10A at 250V for rack loads
  • UL Listed and CSA certified (E210037) for safety compliance
  • Black jacket enables quick circuit tracing in dense racks
  • 105°C temperature rating suits demanding data-centre environments

15 ft C14 to C13 power extension

This 15 ft cable extends the reach between a C14 inlet on a PDU, UPS or server and a standard C13 power cord. It is built for data-centre and rack environments where extra length is needed without adding an adapter. The cord is rated for 10 A at 250 V and carries UL and CSA certification.

18 AWG SJT jacket with IEC 60320 connectors

The three-conductor 18 AWG copper cable uses an SJT jacket rated to 105 °C and 300 V, with an overall diameter of 7.8 mm. A male C14 plug on one end and a female C13 socket on the other match the standard IEC 60320 interface used across servers, switches and AV gear. The black jacket helps identify circuits at a glance.

10 A 250 V limit for rack power distribution

The cord is limited to 10 A at 250 V, so it suits typical server and network equipment but not higher-current loads. It meets UL, cUL and CSA requirements and complies with RoHS and REACH directives. Buyers needing longer runs or higher amperage should select a cable with a larger conductor gauge.

Highlights

  • Extends reach between PDU and server with 15ft C14 to C13 cord
  • 18 AWG SJT copper handles 10A at 250V for rack loads
  • UL Listed and CSA certified (E210037) for safety compliance
  • Black jacket enables quick circuit tracing in dense racks
  • 105°C temperature rating suits demanding data-centre environments

Specifications

BrandCable Leader
Modeljhcex-627
FeaturesThis 15ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125 volts and an input current of 10 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What IEC 60320 connectors does this 15ft cord use, and what current does the 18 AWG SJT cable actually carry?

It has a male C14 plug and a female C13 socket, and the 18 AWG SJT three-conductor copper cable is rated for 10 A at 250 V.

What is the cable's outer diameter, and will it route through standard 1 U rack cable managers?

The jacket measures 7.8 mm OD, which fits typical 1 U horizontal managers and vertical PDU channels without binding.

How do you connect it to a PDU or UPS, and what mistake causes intermittent power?

Insert the C14 plug fully into the PDU or UPS C13 outlet until it clicks, then seat the existing device cord into the C13 socket; the common error is leaving either end partially inserted so the latch does not engage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.