We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 Ethernet cable, non-booted RJ45 plugs, 5 ft length

Cable Leader

Cable Leader 5ft Cat6 Non-Booted Ethernet Cable Yellow 24AWG 550MHz

SKU CH-BTC5-H89VE

A 5 ft Cat6 patch cable tested to 550 MHz with non-booted RJ45 plugs for dense patch panels and 24 AWG bare copper conductors

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorYellow

Length 5ft

Show 2 more configurations

Color Yellow

  • Tested to 550 MHz for headroom above the 250 MHz Cat6 minimum
  • Non-booted plugs seat easily in high-density patch panels and keystone jacks
  • 24 AWG bare copper conductors with 50-micron gold-plated contacts resist corrosion
  • Backward compatible with Cat5e for a drop-in Gigabit upgrade
  • Works with routers, switches, patch panels, PCs and PoE devices

Cable Leader 5 ft Cat6 Non-Booted Patch Cable

This 5-foot Cat6 cable provides a wired Gigabit Ethernet link for routers, switches, patch panels, keystone jacks, PCs and PoE devices. It uses 24 AWG bare copper conductors in four twisted pairs terminated with 8P8C RJ45 plugs featuring 50-micron gold-plated contacts. The yellow jacket aids visual identification in structured cabling environments. It is tested to 550 MHz, exceeding the Cat6 minimum of 250 MHz, and remains backward compatible with Cat5e infrastructure.

Non-Booted Plug for High-Density Panels

The non-booted RJ45 design removes the molded boot found on standard patch cables, allowing the connector to seat cleanly inside tightly packed patch panels and keystone jacks. This physical profile improves airflow around dense port blocks and simplifies cable routing in server rooms and data centres. No shielding is present, so the cable relies on the twisted-pair geometry for noise rejection. It fits any standard RJ45 port without requiring specialised mounting hardware or additional clearance.

Sustained Signal Integrity at 550 MHz

The cable is verified to 550 MHz bandwidth, supporting Gigabit Ethernet continuously and 10G speeds over short runs without the performance dip that can occur on lower-spec links. Bare copper conductors and gold-plated contacts maintain low contact resistance and corrosion resistance over long install lifetimes. RoHS compliance and UL, cUL and ETL listings confirm adherence to safety and materials standards for permanent infrastructure deployments. It is not intended for outdoor or direct-burial use.

Highlights

  • Tested to 550 MHz for headroom above the 250 MHz Cat6 minimum
  • Non-booted plugs seat easily in high-density patch panels and keystone jacks
  • 24 AWG bare copper conductors with 50-micron gold-plated contacts resist corrosion
  • Backward compatible with Cat5e for a drop-in Gigabit upgrade
  • Works with routers, switches, patch panels, PCs and PoE devices

Specifications

TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorYellow
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What bandwidth limit appears first when running 10G traffic over this 550MHz Cat6 cable?

The Cat6 standard caps 10GBASE-T at short runs; the 550MHz rating gives headroom above the 250MHz minimum but does not extend the official distance limit.

How does the non-booted design affect heat or airflow in a fully populated patch panel?

Without a molded boot the plug seats deeper, leaving more space between cables so air moves freely and the panel runs cooler during all-day operation.

Which devices must already have RJ45 ports for this cable to work?

Routers, switches, patch panels, keystone jacks, PCs or PoE equipment — any gear with standard 8P8C RJ45 sockets will connect directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.