Cable Leader
Cable Leader 3m (10ft) OM1 LC-LC Duplex 62.5/125 Corning OFNR Orange
A 3 m OM1 duplex jumper with LC/UPC connectors on genuine Corning fiber, OFNR-rated for in-building 1 GbE and 10 GbE short-reach links
- ColorOrange
- Length5 - 10 ft.
- Connector Number2
- 3m duplex reach links switches and servers
- Genuine Corning fiber ensures consistent optical performance
- LC/UPC ceramic ferrules give secure low-loss mating
- OFNR riser jacket rated for in-building runs
- Supports 1G and 10G short-reach multimode links
3m OM1 LC-LC Duplex Patch Cable
This 3 metre (10 ft) multimode fiber jumper uses genuine Corning 62.5/125 µm fiber with LC/UPC connectors and an orange OFNR jacket. It is built for short-reach Gigabit and 10G links in data centres, SANs and enterprise backbones. The duplex construction keeps transmit and receive strands paired for switch-to-switch or server-to-switch connections.
Installers running OM1 multimode at 1000BASE-SX
Technicians who need a riser-rated duplex patch lead with precision ceramic ferrules and push-pull latching will find this cable fits SFP, SFP+ and QSFP transceivers directly. It does not suit single-mode infrastructure, longer 10G reaches beyond OM1 limits, or installations that require a plenum-rated jacket.
OM1 62.5/125 µm core with Corning fiber
The 62.5/125 µm multimode core built on Corning glass determines the supported reach and bandwidth for 1G and 10G short-range optics. Matching this core size to the transceiver and link budget is the single specification that decides whether the cable is the right part.
Highlights
- 3m duplex reach links switches and servers
- Genuine Corning fiber ensures consistent optical performance
- LC/UPC ceramic ferrules give secure low-loss mating
- OFNR riser jacket rated for in-building runs
- Supports 1G and 10G short-reach multimode links
Specifications
| Brand | GENERIC |
|---|---|
| Color | Orange |
| Length | 5 - 10 ft. |
| Connector Number | 2 |
Questions about this item
What transceiver types must I already have for this OM1 62.5/125 µm cable to carry traffic?
SFP, SFP+ or QSFP modules that support 1000BASE-SX or 10GBASE-SR over multimode fiber with LC/UPC interfaces.
How does this OM1 62.5/125 µm cable perform when mixed with legacy 62.5 µm patch cords in the same link?
It matches the same core size and OM1 specification, so insertion loss and bandwidth stay consistent across the combined run.
How can I verify the LC/UPC ferrules are seated correctly after installation?
The push-pull latch clicks audibly and the duplex clip keeps both connectors keyed; a visual fault locator will show bright, even light at the far end if mating is good.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
