We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red ultra-slim Cat6a patch cable 3 ft with clear snagless boots

Cable Leader

Cable Leader 3ft Cat6a Slim Ethernet Cable 28AWG Red

SKU CH-TF9T-EA9X6

Ultra-slim 4.0mm Cat6a patch cable supports 10GBASE-T at 500MHz over 100m with 28AWG bare copper and 50-micron gold RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorRed

Length 3ft

Show 7 more configurations

Color Red

  • 10 Gb/s wired speed over 100 m at 500 MHz
  • Ultra-slim 4.0 mm jacket fits dense patch panels and racks
  • 28 AWG bare copper with 50 µm gold RJ45 contacts cuts crosstalk
  • Transparent snagless boot protects locking clip during re-patching
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Cable profile for dense racks

The 4.0 mm jacket is far thinner than standard 6.9 mm Cat6a cords, so more cables fit per rack unit and airflow improves across switches and servers. Builders who need a bulkier jacket for heavy pull-through or outdoor conduit should choose a different cable.

Sustained 10 Gigabit link

Cat6a rating and 500 MHz bandwidth support 10GBASE-T up to 100 meters, and the 28 AWG bare copper pairs keep crosstalk low during continuous throughput. Installers who require shielded pairs for noisy industrial environments will not find that protection here.

Gold-plated contact reliability

Each RJ45 plug carries 50-micron gold-plated contacts for low-resistance, corrosion-resistant connections through repeated re-patching. Buyers who need a different contact plating or a non-standard pin-out must look elsewhere.

Highlights

  • 10 Gb/s wired speed over 100 m at 500 MHz
  • Ultra-slim 4.0 mm jacket fits dense patch panels and racks
  • 28 AWG bare copper with 50 µm gold RJ45 contacts cuts crosstalk
  • Transparent snagless boot protects locking clip during re-patching
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorRed
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the slim 4.0mm jacket help airflow and reduce heat in a packed server rack?

Yes, the 4.0mm outer diameter is far thinner than standard 6.9mm Cat6a cords, so more cables fit per rack unit, bend radii stay tight behind dense panels, and airflow improves across switches and servers, lowering heat in busy deployments.

What devices or ports must I already have to use this cable?

Any standard RJ45 port — switches, routers, patch panels, keystone jacks, PoE devices, servers or NAS — will accept the 8P8C plugs with 50-micron gold-plated contacts; no special adapters or proprietary hardware are required.

Will this Cat6a cable work with my existing Cat6 and Cat5e patch panels and keystones?

Fully backward compatible — the cable meets the Cat6a standard at 500MHz and 10GBASE-T up to 100m, yet drops straight into Cat6 and Cat5e RJ45 infrastructure without changing panels, jacks or switches.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.