We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 3ft Cat6 Non-Booted Ethernet Cable Blue 24AWG 550MHz

SKU CH-3BSC-TG4PK

Three-foot Cat6 patch cable with non-booted RJ45 plugs for dense patch panels, 24AWG bare copper tested to 550MHz

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorBlue

Length 3ft

Show 2 more configurations
  • Supports Gigabit and short-run 10G speeds with 550MHz tested bandwidth
  • Non-booted plugs fit high-density patch panels and keystone jacks without crowding
  • 24AWG bare copper conductors with 50-micron gold-plated contacts ensure reliable signal integrity
  • Backward compatible with Cat5e for a simple drop-in upgrade path
  • RoHS compliant and UL, cUL & ETL listed for safety assurance

High-density Cat6 patch cable

The Cable Leader 3ft Cat6 Non-Booted Ethernet Cable is a blue RJ45 patch lead built for tight, high-density installs such as patch panels and keystone jacks. It uses 24AWG bare copper conductors in four twisted pairs with 50-micron gold-plated contacts for reliable Gigabit connectivity. The non-booted plug design simplifies cable management and improves airflow in crowded racks. It is backward compatible with Cat5e for a straight drop-in upgrade.

Thermals noise and power

As a passive copper cable it draws no power, produces no heat and makes no noise during normal operation. The unshielded twisted-pair construction relies on the 550MHz tested bandwidth to maintain signal integrity without active components. Gold-plated contacts resist corrosion so performance stays consistent over time. No external power supply or cooling is required for any supported device.

550MHz tested bandwidth

The cable is verified to 550MHz, well above the 250MHz Cat6 minimum, and supports 10G speeds over short runs. This single figure determines whether the link meets the headroom your installation demands. Buyers who need shielded runs or longer 10G distances should look elsewhere.

Highlights

  • Supports Gigabit and short-run 10G speeds with 550MHz tested bandwidth
  • Non-booted plugs fit high-density patch panels and keystone jacks without crowding
  • 24AWG bare copper conductors with 50-micron gold-plated contacts ensure reliable signal integrity
  • Backward compatible with Cat5e for a simple drop-in upgrade path
  • RoHS compliant and UL, cUL & ETL listed for safety assurance

Specifications

TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorBlue
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the non-booted RJ45 plugs into a high-density patch panel without damaging the latch?

Press the plug straight in until the latch clicks; the non-booted design leaves the latch exposed so it seats fully in tight panels, but avoid angling the connector which can bend the latch tab.

Will the 50-micron gold-plated contacts need cleaning or re-termination over time?

The 50-micron gold plating resists corrosion; under normal indoor use the contacts do not require cleaning or re-termination for the life of the cable.

At what length does the 550 MHz tested bandwidth stop supporting 10 Gbps speeds?

The cable is tested to 550 MHz and supports 10 Gbps only over short runs; for full-distance 10 Gbps a Cat6a or higher cable is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.