Cable Leader
Cable Leader 2ft NEMA 5-15P to C15 14 AWG 15A 125V Blue computer power cord
A 2 ft heavy-duty 14 AWG cord with a NEMA 5-15P plug and IEC C15 connector, rated 15A at 125V for servers and high-draw equipment
- ColorBlue
- Length21" - 25"
- Connector Number2
- Wire Gauge14 AWG
- Heavy-duty 14 AWG copper handles up to 15A for servers and high-draw gear
- SJT jacket rated 105°C and 300V withstands demanding operating temperatures
- UL Listed and CSA certified (file E210037) with RoHS compliance for verified safety
- Fully molded 3-wire grounded design with strain relief protects connections
- 2 ft blue cord connects NEMA 5-15P outlet to IEC 60320 C15 inlet
Ready-to-use replacement cord
The Cable Leader 2 ft NEMA 5-15P to C15 power cord connects a computer, monitor, server or printer to a wall outlet, power strip or PDU. The three-prong 5-15P plug fits standard North American receptacles while the IEC 60320 C15 connector mates with the device inlet. Fully molded, grounded three-wire construction with strain relief makes it a direct replacement for a worn or missing factory cable. UL Listed, CSA certified (file E210037) and RoHS compliant.
Heavy-duty gauge runs cool
Built with 14 AWG SJT-jacketed copper rated 15A at 125V and 105C / 300V, the cord handles higher-draw equipment without overheating. The heavier conductor cross-section keeps resistance low so the jacket stays cool under continuous load. No fan or active cooling is involved; the cable simply dissipates heat through its robust insulation during normal operation.
Step up from lighter leads
Replaces 18 AWG or 16 AWG cords that are rated for 10A or 13A respectively when the connected gear draws closer to 15A. The upgrade is worth it for servers, PDUs or workstations that need the full 15A capacity and the 105C temperature margin. Not for buyers who need a longer reach than the 21-25 inch length provides or who require a C13 connector instead of the higher-temperature C15 inlet.
Highlights
- Heavy-duty 14 AWG copper handles up to 15A for servers and high-draw gear
- SJT jacket rated 105°C and 300V withstands demanding operating temperatures
- UL Listed and CSA certified (file E210037) with RoHS compliance for verified safety
- Fully molded 3-wire grounded design with strain relief protects connections
- 2 ft blue cord connects NEMA 5-15P outlet to IEC 60320 C15 inlet
Specifications
| Brand | GENERIC |
|---|---|
| Color | Blue |
| Length | 21" - 25" |
| Connector Number | 2 |
| Wire Gauge | 14 AWG |
Questions about this item
How do I install this 2 ft NEMA 5-15P to C15 cord and what is the step people often miss?
Plug the 5-15P end into a 125 V outlet or PDU and the C15 end into the equipment inlet; the step often missed is verifying the device actually uses a C15 inlet rather than the more common C13, because the C15 keying prevents a C13 plug from seating.
What maintenance or replacement will this cord need later?
No routine maintenance is required; inspect the SJT jacket and molded strain relief periodically for cuts or heat damage, and replace the cord if the 14 AWG conductors show discoloration or the connectors become loose.
What limit appears first under sustained load?
The 15 A / 125 V rating of the 14 AWG conductors and the 105 °C temperature rating of the SJT jacket are the limiting factors; continuous operation above 15 A or in ambient conditions that push the jacket past 105 °C will degrade the cord first.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
