We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 2 ft 14 AWG 15A 125V Computer Power Extension Cord

SKU CH-2RSZ-6WFXH

A 2 ft indoor extension cord with 14 AWG grounded copper adds reach for computers and appliances up to 15A at 125V

  • TypeExtension Cable
  • ColorBlack
  • Length2 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG
  • Adds 2 ft reach to wall outlets or power strips with NEMA 5-15P to 5-15R connectors
  • Heavy-duty 14 AWG copper handles 15A at 125V for servers and high-draw equipment
  • Fully grounded 3-wire design with molded plugs and strain relief for safe indoor use
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Indoor-rated SJT jacket suits offices, labs and workshops — not for wet outdoor locations

Extends 3-Prong Power Cords

The Cable Leader 2 ft NEMA 5-15P to 5-15R extension cord adds reach between a wall outlet, power strip or surge protector and any standard 3-prong device cord. It is built with 14 AWG, 15A / 125V grounded copper inside an SJT jacket for indoor use. The moulded plugs and strain relief provide a secure, fully grounded connection.

Upgrade from Thinner Gauge Cords

A 14 AWG cord replaces 18 AWG or 16 AWG leads when the attached equipment draws more current than those lighter gauges can safely carry. The step up is worth it for servers, PDUs and higher-draw appliances that need the 15A rating instead of 10A or 13A limits. The heavier copper and SJT jacket also improve durability in busy office, lab or workshop environments.

Check Plug Type and Indoor Rating

Verify that the power source and the device cord both use standard 3-prong NEMA 5-15 connectors before ordering. Confirm the installation will stay indoors, because the SJT jacket is not rated for wet or outdoor locations. Ensure the equipment’s current draw does not exceed 15A at 125V, and that a 2 ft length provides the extra reach required without excess slack.

Highlights

  • Adds 2 ft reach to wall outlets or power strips with NEMA 5-15P to 5-15R connectors
  • Heavy-duty 14 AWG copper handles 15A at 125V for servers and high-draw equipment
  • Fully grounded 3-wire design with molded plugs and strain relief for safe indoor use
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Indoor-rated SJT jacket suits offices, labs and workshops — not for wet outdoor locations

Specifications

TypeExtension Cable
ColorBlack
Length2 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Questions about this item

What outlet type does the NEMA 5-15P plug fit?

The NEMA 5-15P plug fits any standard 3-prong 125V wall outlet, power strip or surge protector.

How do I connect the extension cord without creating a loose link?

Push the 5-15P male plug fully into the wall outlet or strip until the moulded body seats, then insert your device cord into the 5-15R female end until it clicks.

When should the 14 AWG SJT cord be replaced?

Replace it if the jacket shows cuts, the plug blades bend, the ground pin is missing, or the cord feels warm during normal 15A use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.