We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with ST connectors, 1 metre length

Cable Leader

Cable Leader 1m OM2 ST-ST Duplex 50/125 Corning OFNR Orange

SKU CH-CMD4-80MXA

A 1m OM2 multimode duplex fiber patch cable with ST connectors and Corning fiber for 1G and 10G short-reach links

  • ColorOrange
  • Length36" - 40"
  • Connector Number2
  • Genuine Corning fiber ensures consistent optical performance
  • OM2 multimode supports 1G and 10G short-reach links
  • ST/UPC ceramic ferrules give secure low-loss connections
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 50/125µm design keeps transmit and receive fibers paired

OM2 duplex ST-to-ST patch cable for short-reach

The Cable Leader 1m OM2 duplex patch cable uses genuine Corning 50/125µm multimode fiber with ST/UPC connectors on both ends. The orange OFNR riser-rated jacket is suited for in-building and data center runs. It supports 1000BASE-SX and 10GBASE-SR short-reach links up to 10 Gbps over multimode. This cable connects SFP, SFP+, QSFP transceivers, switches, routers, media converters and patch panels in enterprise and SAN environments.

Ideal for rack-to-rack

Network engineers building or extending OM2 multimode links in data centers, SAN fabrics or enterprise backbones will find the correct connectors and fiber grade here. The push-pull ST latching gives secure, low-loss mating for repeated patching. Installations that require single-mode reach, LC or MPO interfaces, or plenum-rated OFNP jackets should look at other cable types.

1m OM2 50/125µm ST duplex

The defining specification is the OM2 50/125µm multimode fiber built on Corning glass, terminated in ST/UPC duplex connectors with an OFNR orange jacket at a 1m length. This combination determines compatibility with 1000BASE-SX and 10GBASE-SR transceivers and suitability for riser-rated indoor pathways.

Highlights

  • Genuine Corning fiber ensures consistent optical performance
  • OM2 multimode supports 1G and 10G short-reach links
  • ST/UPC ceramic ferrules give secure low-loss connections
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 50/125µm design keeps transmit and receive fibers paired

Specifications

BrandGENERIC
ColorOrange
Length36" - 40"
Connector Number2

Questions about this item

What spacing do the ST connectors need on the patch panel or adapter plate?

The duplex ST connector pair matches standard duplex ST adapter spacing used on patch panels and wall plates for 50/125 µm multimode fiber.

What is the correct way to seat the ST connectors so they latch properly?

Align the keyed ceramic ferrule with the adapter slot, push straight in until the bayonet collar engages, then twist clockwise to lock the push-pull latch; the most common mistake is stopping at the first click without the quarter-turn.

When should the cable be replaced if the jacket shows wear?

Replace the cable if the orange OFNR riser-rated jacket is cracked, kinked or abraded, because jacket damage can stress the Corning fiber inside and increase insertion loss on 1000BASE-SX or 10GBASE-SR links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.