Cable Leader
Cable Leader 10m OM2 LC to SC Fibre Optic Cable Duplex 50/125 Orange OFNR
A 10-metre multimode duplex patch cable with LC to SC connectors, Corning fibre and an OFNR jacket for Gigabit and 10G links
- ColorOrange
- Length31 - 50 ft.
- Connector Number2
- 10m duplex OM2 link for 1G and 10G short-reach networks
- Genuine Corning fiber ensures consistent low-loss performance
- LC/UPC and SC/UPC ceramic ferrules with push-pull latching
- OFNR riser-rated jacket suited for in-building and data center runs
- Compatible with SFP, SFP+ and QSFP transceivers and patch panels
10 metre OM2 duplex patch lead
This 10 metre multimode cable connects LC and SC interfaces across data-centre racks, SAN fabrics and enterprise backbone links. The orange OFNR jacket meets riser-rated fire requirements for in-building vertical runs. It is built on genuine Corning fiber to deliver repeatable insertion-loss performance in high-density patching environments. Installers terminating SFP, SFP+ or QSFP transceivers gain a factory-polished ceramic ferrule with push-pull latching.
Sustained 1G and 10G short-reach throughput
The duplex 50/125 micron core supports continuous 1000BASE-SX and 10GBASE-SR traffic without the signal degradation seen on lesser-grade jumpers during extended transfers. Corning glass geometry keeps modal bandwidth stable across the full 33 foot length, so latency and bit-error rates remain predictable under constant load. Switch-to-switch and server-to-switch segments therefore avoid the intermittent errors that can appear on cables with looser core tolerances.
Riser-rated jacket for safe in-building routing
The OFNR construction resists flame spread in vertical shafts and plenum-adjacent pathways, removing the need for separate conduit in most commercial installations. Orange color coding simplifies cable management audits and fault tracing in dense patch panels. Ceramic ferrules and precision end-face geometry keep insertion loss low, reducing the optical power budget consumed by the link itself. The assembly operates within standard transceiver power envelopes without additional cooling or power considerations.
Highlights
- 10m duplex OM2 link for 1G and 10G short-reach networks
- Genuine Corning fiber ensures consistent low-loss performance
- LC/UPC and SC/UPC ceramic ferrules with push-pull latching
- OFNR riser-rated jacket suited for in-building and data center runs
- Compatible with SFP, SFP+ and QSFP transceivers and patch panels
Specifications
| Brand | GENERIC |
|---|---|
| Color | Orange |
| Length | 31 - 50 ft. |
| Connector Number | 2 |
Questions about this item
Does the 10m length of this OM2 duplex patch cord add noticeable signal loss for a 10GBASE-SR link?
At 10m the cable is well within the OM2 reach for 10GBASE-SR, and the Corning fiber with UPC ceramic ferrules keeps insertion loss low for short-reach links.
What transceiver and patch-panel connectors do I need to have on hand before installing this LC-to-SC jumper?
You need transceivers or patch-panel ports with LC and SC interfaces — SFP, SFP+ or QSFP modules on one side and SC adapters on the other — to match the duplex LC-to-SC terminations.
Can I mix this 50/125µm OM2 cable with the OM2 patch cords already in my rack without changing polarity?
Yes — both are OM2 50/125µm duplex assemblies, so the fiber type and core size match and the duplex clip keeps transmit and receive fibers correctly oriented.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



