We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft IEC C14 to C13 heavy-duty power extension cord, 14 AWG SJT jacketed cable with grounded connectors

Cable Leader

Cable Leader 10ft IEC C14 to C13 14 AWG 15A 250V Black computer power adapter cord

SKU CH-PC3E-V3K2T

A 10 ft heavy-duty 14 AWG extension cord adds reach between a C14 plug and C13 socket, rated 15A at 250V with UL and CSA certification

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 power connections by 10 ft without extra adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • UL Listed and CSA certified (file E210037) plus RoHS compliant
  • Black jacket simplifies rack circuit and phase identification at a glance

Extends C14 to C13 power connections

This ten-foot cord adds reach between a rack PDU, UPS or server and an existing C13 cord. A male IEC 60320 C14 plug connects to the power source while the female C13 socket accepts the equipment cord. Heavy-duty 14 AWG copper conductors with an SJT jacket are rated 15 amps at 250 volts for server and data-centre loads. UL Listed and CSA certified with a RoHS-compliant build.

Upgrades from lighter-gauge cords

An 18 AWG cord handles up to ten amps for light electronics while a 16 AWG cord reaches thirteen amps for desktop computers. The 14 AWG construction here supports fifteen amps, making the jump worthwhile when powering PDUs, switches or higher-draw rack gear. Builders needing twenty-amp capacity must select a twelve AWG cord instead.

Fits standard rack and PDU layouts

The IEC 60320 C14 and C13 connectors are the common interface across servers, network switches and AV equipment. The black SJT jacket helps trace circuits and phases at a glance in dense racks. No adapter is required; the cord simply extends an existing C14-to-C13 run. Equipment requiring a different connector family or a higher amperage rating will need a separate solution.

Highlights

  • Extends C14/C13 power connections by 10 ft without extra adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • UL Listed and CSA certified (file E210037) plus RoHS compliant
  • Black jacket simplifies rack circuit and phase identification at a glance

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

What clearance does the 10 ft IEC 60320 C14-to-C13 cord need inside a server rack?

The 14 AWG SJT jacket is rated for 105 °C and 300 V, so leave enough space for the cable bend radius and airflow around the 15 A / 250 V conductors.

Which step do installers often miss when connecting the male C14 plug to a PDU and the female C13 socket to existing gear?

Fully seat both IEC 60320 connectors until they click; a loose C14 or C13 contact can cause heating under 15 A load.

When should the 14 AWG SJT extension cord be replaced in a rack environment?

Inspect the jacket and connectors at each maintenance cycle; replace if the black SJT sheath shows cracking, discoloration from 105 °C exposure, or if the C14/C13 pins are loose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.