We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power splitter cord with one 5-15P plug branching to three C13 connectors

Cable Leader

Cable Leader 10ft 5-15P to 3x C13 Power Splitter Cord 18 AWG 10A 125V Black

SKU CH-3H3F-MRY1S

A 10 ft Y-splitter powers three C13 devices from one 5-15P outlet using 18 AWG SJT cable rated 10A at 125V with UL and CSA certification

Length 10ft

  • Powers three devices from one outlet using a 5-15P to triple C13 splitter
  • 18 AWG SJT cable rated 10A at 125V with 105°C / 300V insulation
  • Y-style design saves rack space for servers, switches and PDU connections
  • Fully grounded three-wire construction with moulded connectors and strain relief
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Splitter Cord for Three C13 Devices

The Cable Leader 10ft power splitter cord converts a single 5-15P mains plug into three C13 outlets, letting you run up to three devices from one wall socket or PDU. It is built with 18 AWG SJT-jacketed copper conductors rated for 10A at 125V and carries UL and CSA certification (file E210037) plus RoHS compliance. Molded connectors and strain relief provide a fully grounded, three-wire connection.

Suited for Rack Gear — Not for Higher-Current Loads

This splitter suits installers who need to feed multiple servers, switches or other rack-mounted equipment from a single feed while staying within the 10A total limit. Builders whose combined equipment draw exceeds 10A, or who require a heavier gauge such as 16 AWG or 14 AWG for 13A to 15A loads, should select a different cord. The 10ft length works in standard rack layouts but may be short for floor-to-ceiling runs.

Key Specification Is the 18 AWG 10A Rating

The single figure that decides fit is the 18 AWG, 10A at 125V rating; the total current of all three connected devices must not exceed 10A. The SJT jacket is rated 105C and 300V, and the cord is UL Listed and CSA certified (file E210037). Verify your aggregate load against this 10A limit before purchasing.

Highlights

  • Powers three devices from one outlet using a 5-15P to triple C13 splitter
  • 18 AWG SJT cable rated 10A at 125V with 105°C / 300V insulation
  • Y-style design saves rack space for servers, switches and PDU connections
  • Fully grounded three-wire construction with moulded connectors and strain relief
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How long before the 18 AWG conductors or molded C13 ends need replacing under daily server-rack use?

The cord carries a Cable Leader lifetime warranty; US-based support will replace it if the 18 AWG copper, SJT jacket or any molded connector ever fails.

What is the first limit reached when all three C13 outlets run continuously at full load?

The 10 A / 125 V rating on the single 5-15P plug caps total draw, so the input current limit appears before any individual output or the 105 °C / 300 V cable rating.

How warm does the SJT jacket get and how much power does the splitter itself waste when loaded to 10 A all day?

The 18 AWG copper and SJT jacket are rated to 105 °C; the splitter adds no active components, so waste heat is only normal resistive loss in the conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.