We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3-foot Y-cable with one 5-15P plug splitting to three C13 connectors

Cable Leader

Cable Leader 3ft 5-15P to 3x C13 Power Splitter Cord 18 AWG 10A 125V Black

SKU CH-0D4X-CNKCW

A three-foot splitter powers three C13 devices from one 5-15P outlet using 18 AWG grounded cable rated 10A at 125V with UL and CSA certification

Length 3ft

  • Powers three devices from one outlet with 5-15P to triple C13 split
  • 18 AWG SJT cable rated 10A at 125V for safe continuous use
  • Fully grounded three-wire design with moulded connectors and strain relief
  • UL Listed and CSA certified file 210037 plus RoHS compliant
  • Compact Y splitter saves rack space for servers and network gear

What this splitter does

The Cable Leader 3 ft cord converts one NEMA 5-15P wall or PDU outlet into three IEC C13 sockets, letting you power up to three rack-mounted devices from a single feed. It uses 18 AWG SJT-jacketed copper rated for 10 A at 125 V and carries UL and CSA certification (file E210037).

Who should use it and who should not

Suited for administrators wiring servers, switches or other C13-equipped gear in a rack where total draw stays within 10 A. Not suited for installations that require a higher total current rating, a different input plug type, or longer reach than the 3 ft length provides.

The specification that decides fit

The 18 AWG, 10 A / 125 V rating is the single figure that determines whether this splitter can handle your combined load; exceed it and you must choose a heavier-gauge cord.

Highlights

  • Powers three devices from one outlet with 5-15P to triple C13 split
  • 18 AWG SJT cable rated 10A at 125V for safe continuous use
  • Fully grounded three-wire design with moulded connectors and strain relief
  • UL Listed and CSA certified file 210037 plus RoHS compliant
  • Compact Y splitter saves rack space for servers and network gear

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 18 AWG SJT cable run warm when all three C13 outputs are drawing near the 10 A limit?

The cord uses 18 AWG copper rated for 10 A at 125 V with a 105 °C / 300 V SJT jacket; under full load the conductors and jacket will warm but stay within their temperature rating.

What wall outlet and device inlets are required to use this splitter?

You need a standard NEMA 5-15P wall receptacle and three pieces of equipment that accept IEC C13 plugs.

Will the moulded 5-15P plug and three C13 connectors fit side-by-side on an older PDU or power strip with tight outlet spacing?

The moulded connectors include strain relief but add bulk; on legacy PDUs with closely spaced 5-15R outlets the Y-splitter may block adjacent sockets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.