We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black RJ45 splitter box with one input, three outputs and USB-C power port

C&N

C&N 1-to-3 RJ45 1000Mbps network connector

SKU CH-ECQH-6PQ8G

Ethernet splitter expands one RJ45 port into three 1000Mbps ports with USB-C power, supporting Cat5 to Cat8 cables over 100 metres

  • Expands one Ethernet line into three active ports
  • Powered USB-C adapter keeps all three links stable at 1000Mbps
  • Each output auto-negotiates 10/100/1000Mbps without signal interference
  • Works with Cat5 through Cat8 cables up to 100 metres
  • Solves wiring shortages by letting two devices share one cable simultaneously

Network expansion for three devices

This RJ45 splitter turns one Ethernet line into three active ports so two computers can share the connection at the same time. USB power is required for operation and the unit ships with a USB-C charging cable. It works with Cat5, Cat5e, Cat6, Cat7 and Cat8 cables over runs up to 100 metres.

Ideal for limited cabling not for full switching

Home users and small offices with a single wall jack but multiple wired devices will benefit from the simple 1-to-3 layout. Builders who need a managed switch with independent gigabit paths for three simultaneous high-throughput streams should look at a dedicated switch instead.

USB-C 5V 1A power requirement

The splitter only functions when the USB-C port receives 5V 1A power, so a nearby USB charger or powered hub is mandatory. Without that supply the three RJ45 outputs remain inactive regardless of cable quality.

Highlights

  • Expands one Ethernet line into three active ports
  • Powered USB-C adapter keeps all three links stable at 1000Mbps
  • Each output auto-negotiates 10/100/1000Mbps without signal interference
  • Works with Cat5 through Cat8 cables up to 100 metres
  • Solves wiring shortages by letting two devices share one cable simultaneously

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the C&N 1-to-3 RJ45 1000Mbps network connector, and which step is commonly missed?

Connect the single RJ45 input to your source cable, attach the three RJ45 outputs to your devices, then plug the USB C power port into a 5V 1A supply; the splitter will not function without this power connection.

What maintenance or replacement will this RJ45 1-to-3 splitter need over time?

No scheduled maintenance is required; if the USB C power cable or any RJ45 port becomes damaged, replace the entire unit.

What limit appears first when the C&N 1-to-3 network connector runs under sustained load?

The 1000Mbps total bandwidth shared across the three output ports is the first bottleneck during heavy simultaneous traffic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.