We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 25 ft combo cable with RG6 quad shield coax and CAT6 UTP in one jacket

BZBGEAR

BZBGEAR BG-CAB-SDICAT25 25ft 12G-SDI+ CAT6 Combo Cable

SKU CH-3F55-8Y0PN

A 25 ft combo cable integrating RG6 quad-shield coax and CAT6 UTP for combined video and data runs

  • Cat6
  • Length25 ft.
  • ColorBlack

Length 25ft/7.5m

  • Single cable carries both 12G-SDI video and gigabit data
  • CAT6 tested to 550 MHz supports PoE and PoE+
  • RG6 quad shield keeps satellite and HDTV signals clean
  • UL listed CMG jacket meets fire and safety codes
  • 25 ft length suits typical residential and commercial runs

Dual-purpose 12G-SDI and CAT6 cable

This BZBGEAR combo cable integrates RG6 Quad Shield coaxial and CAT6 UTP conductors in a single 25 ft run. It is intended for installers who need both satellite or HDTV distribution and gigabit Ethernet with PoE support from one pull. The construction suits residential, commercial and professional AV projects that require simultaneous video and data paths.

Practical limits of the CAT6 and coax elements

The CAT6 portion uses 23 AWG solid bare copper tested to 550 MHz and complies with ANSI/TIA-568-C.2 and ISO/IEC 11801 for structured wiring. The RG6 Quad Shield section uses an 18 AWG copper-clad steel centre conductor with multiple shielding layers for satellite, CATV and HDTV signals. At 25 ft the cable stays well within typical horizontal-run limits, but longer pulls would need separate attenuation calculations.

Installation notes and common pitfalls

A black PVC jacket with an internal ripcord allows quick jacket removal for termination. The cable is UL Listed, CMG rated, RoHS compliant and meets NEC Article 800 and CEC requirements for in-wall use. Installers must observe the separate bend-radius needs of the coax and twisted-pair sections and terminate each connector type with the correct tooling; mixing the two conductor sets in a single connector will cause signal failure.

Highlights

  • Single cable carries both 12G-SDI video and gigabit data
  • CAT6 tested to 550 MHz supports PoE and PoE+
  • RG6 quad shield keeps satellite and HDTV signals clean
  • UL listed CMG jacket meets fire and safety codes
  • 25 ft length suits typical residential and commercial runs

Specifications

BrandBZBGEAR
ModelBG-CAB-SDICAT25
Cat6
Length25 ft.
ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 25 ft combo cable or the 500 ft spool for my installation?

The 25 ft cable suits short point-to-point runs such as a single camera or wall plate, while the 500 ft spool is intended for whole-building structured wiring where you cut custom lengths on site.

What does the 550 MHz sweep-test rating mean for my gigabit network?

It confirms the CAT6 pair meets the bandwidth headroom required for reliable 1 Gbps Ethernet and PoE+ power delivery over the full 25 ft length.

How does the CMG rating and NEC Article 800 listing affect where I can run this cable?

CMG and NEC 800 approval mean the cable is rated for general in-wall and riser use in residential and commercial buildings without conduit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.