We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BZBGEAR

BZBGEAR BG-CAB-SDI250 250ft 75-ohm Shielded SDI Cable

SKU CH-9TG2-0Z695

A 250 ft shielded 75-ohm SDI cable with BNC connectors transmits 1080P60 video up to 100 m and is 3 GHz sweep-tested for reliable, interference-free connections

  • TypeSDI Cable
  • Length250 ft.
  • ShieldingYes
  • Cable Length250 ft.
  • Transmit 1080P60 video over 250 ft reliably
  • 75-ohm shielding rejects interference for clean signal
  • High-quality BNC connectors maintain stable connection
  • Sweep tested at 3 GHz to guarantee performance
  • Reaches 100 m distance for professional installations

250 ft 75-ohm SDI cable for professional video

This 250 ft SDI cable uses 75-ohm shielded coaxial construction with BNC connectors. It is built for 3G-SDI cameras and equipment that require a dependable link over long runs. Installers working on permanent or temporary setups get a cable rated for 1080P60 signal transmission.

Shielded design rejects interference on extended

A woven shield helps block electromagnetic interference so the picture stays clean at distance. The cable has been 3 GHz sweep tested to verify performance across its full 100 m reach. High-quality BNC connectors maintain a stable connection without signal degradation.

Ready for immediate deployment in the field

No adapters or software are bundled; the cable terminates in BNC plugs on both ends. Its rugged jacket is designed to withstand repeated handling and years of abuse on location or in the studio. The length supports runs where shorter cables fall short.

Highlights

  • Transmit 1080P60 video over 250 ft reliably
  • 75-ohm shielding rejects interference for clean signal
  • High-quality BNC connectors maintain stable connection
  • Sweep tested at 3 GHz to guarantee performance
  • Reaches 100 m distance for professional installations

Specifications

BrandBZBGEAR
ModelBG-CAB-SDI250
TypeSDI Cable
Length250 ft.
ShieldingYes
Cable Length250 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the BNC connectors on this 250 ft cable without damaging the 75-ohm shield?

Push each BNC connector straight onto the device port until it clicks, then rotate the locking ring a quarter-turn clockwise; the woven shield stays intact because the connector is pre-terminated at the factory.

What part of this cable will need replacement first after repeated coiling for location shoots?

The strain relief at each BNC end wears before the coaxial core; inspect the boot for splits and replace the entire assembly if the shield braid becomes visible.

At what distance does 1080P60 signal quality hit its limit on this 250 ft run?

The 3 GHz sweep test guarantees 1080P60 up to 100 m; beyond that the attenuation of the 75-ohm coax becomes the first limiting factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.