We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminum GPU support bracket 250mm long 33mm wide

Bykski

Bykski Universal GPU Aluminum Support Bracket Silver 250mm 33mm

SKU CH-GBSH-7MG42

Aluminium bracket supports graphics cards up to 250 mm long and 33 mm wide to prevent sag

  • TypeCPU Block
  • ColorSilver
  • Prevents GPU sag with a rigid 250 mm aluminium brace
  • Third mounting point secures the card against downward flex
  • Compatible with air-cooled and liquid-cooled graphics cards
  • Uses existing case expansion-slot holes for quick installation
  • Silver anodised finish adds a clean look inside the build

Universal GPU Support Bracket

The Bykski Universal GPU Aluminum Support Bracket adds a third side of support for graphics cards to prevent sag and reduce downward pressure on the motherboard slot. It is designed for builders who want to protect heavy air-cooled or water-cooled cards in systems that are moved or transported regularly.

Aluminium Construction and Slot Mounting

Made from silver aluminium, the bracket measures 250mm in length and 33mm in width. It attaches using the existing case expansion-slot pattern, so no extra drilling or proprietary brackets are required. The open design leaves clearance for backplates and water-block fittings on both air-cooled and liquid-cooled models.

Upgrade From No Support

This bracket replaces the common practice of relying solely on the rear I/O screws or improvised props. The improvement is worthwhile when a long, heavy card visibly bows or when a system is transported to LAN events, because the third contact point distributes weight and reduces stress on the PCIe slot and PCB. It does not address builders who need adjustable-height support for non-standard slot spacing or cards that exceed the fixed 250mm reach.

Highlights

  • Prevents GPU sag with a rigid 250 mm aluminium brace
  • Third mounting point secures the card against downward flex
  • Compatible with air-cooled and liquid-cooled graphics cards
  • Uses existing case expansion-slot holes for quick installation
  • Silver anodised finish adds a clean look inside the build

Specifications

TypeCPU Block
ColorSilver

Questions about this item

What expansion-slot mounting pattern does the 250 mm bracket use to fit most video cards?

It uses the standard case expansion-slot pattern already present on the rear of the chassis, so the bracket bolts directly to those holes without extra adapters.

How much clearance does the 33 mm width require beside the graphics card?

The bracket is 33 mm wide, so you need at least that much free space between the card’s edge and any side-panel fan, drive cage or cable routing channel.

Which installation step is most often missed when securing the bracket?

Many builders forget to tighten the expansion-slot screws after aligning the bracket, leaving the card supported only by friction instead of a rigid third mounting point.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.