Bykski
Bykski G 1/4in SLI/CF Expansion Joint 16-22mm
Adjustable brass expansion joint bridges GPU blocks with G 1/4in threads from 16 to 22mm
- TypeCPU Block
- ColorBlack
- Bridges GPU blocks in SLI or CrossFire setups with adjustable 16-22mm spacing
- Fits any G 1/4in threaded component for flexible loop routing
- Diamond-knurled brass body provides secure grip during installation
- Adjustable length compensates for misaligned block ports without extra fittings
- Brass construction resists corrosion in non-aluminium liquid-cooling loops
Adjustable SLI/CF Bridge
The Bykski G 1/4in expansion joint connects two GPU water blocks in a parallel loop. It suits builders assembling a custom liquid-cooling circuit with dual graphics cards. The fitting accepts any component with a standard G 1/4in thread.
G 1/4in Thread Compatibility
The joint uses a G 1/4in thread on both ends, the single specification that determines fit with your existing fittings and blocks. It is designed for non-aluminium loops to avoid galvanic corrosion. Verify that every connected part shares this thread standard.
Telescopic Length Under Pressure
The brass body telescopes between 16mm and 22mm, absorbing minor alignment shifts between cards. Diamond knurling on the metal surface provides grip during hand-tightening. The adjustable range maintains a sealed path while the loop pressurises and components expand thermally.
Highlights
- Bridges GPU blocks in SLI or CrossFire setups with adjustable 16-22mm spacing
- Fits any G 1/4in threaded component for flexible loop routing
- Diamond-knurled brass body provides secure grip during installation
- Adjustable length compensates for misaligned block ports without extra fittings
- Brass construction resists corrosion in non-aluminium liquid-cooling loops
Specifications
| Type | CPU Block |
|---|---|
| Color | Black |
Questions about this item
How far can the expansion joint span between two GPU blocks?
The joint adjusts from 16 mm to 22 mm, so you can bridge gaps within that range when linking GPU blocks in an SLI or CrossFire loop.
What thread standard does the joint use and what does it limit?
It uses G 1/4 in. threads, which is the common water-cooling standard; the thread size limits you to fittings and blocks that also have G 1/4 in. ports.
What clearance do I need to install the joint in my loop?
You need enough space for the joint’s adjustable length of 16 mm to 22 mm plus the G 1/4 in. threaded ends, and the brass body fits standard hard-tube or soft-tube runs in a non-aluminium loop.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115247BTC
In stock
