We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical clear acrylic cylinder 220mm tall with black aluminium end caps, integrated DDC pump

Bykski

Bykski DDC Pump Reservoir Station 220mm Temp Display 5V ARGB

SKU CH-RM35-6MB4C

A 220 mm reservoir with integrated DDC pump, digital temperature readout and 5 V addressable RGB lighting

  • TypeCPU Block
  • Real-time loop monitoring with digital temperature readout
  • Quiet 5000 RPM DDC pump delivers 600 L/h flow
  • 5V addressable RGB lighting syncs across the build
  • 220 mm tall PMMA reservoir shows coolant clearly
  • Multiple mounting options include 120 mm bracket and DIY elbows

Pump-reservoir combo with temperature display

This Bykski station integrates a DDC pump, a 220 mm tall PMMA reservoir and a digital temperature read-out in one unit. It suits custom-loop builders who want real-time coolant monitoring and 5 V addressable RGB lighting without separate components. The aluminium cover plates and pump armour add structural rigidity while keeping coolant contact limited to acrylic.

Check G 1/4 thread count and mounting space

The station provides three inlets and one outlet, all G 1/4 in, so verify your fittings match that thread before ordering. A 120 mm mounting bracket and DIY elbow brackets are included, but confirm your case can accommodate the 220 mm height, 81 mm width and 73.8 mm depth. The pump requires a 4-pin PWM header and a 4-pin Molex connector from the power supply.

Thermals, noise and power draw in normal use

Rated at 15 W TDP on a 12 V rail (10–15 V range), the pump spins up to 5000 RPM and delivers 600 L/h flow with a 6 m head. At 4000 RPM the coolant temperature is specified at 45 °C while low-vibration operation keeps acoustic output minimal. MTBF is listed at 50 000 hours.

Highlights

  • Real-time loop monitoring with digital temperature readout
  • Quiet 5000 RPM DDC pump delivers 600 L/h flow
  • 5V addressable RGB lighting syncs across the build
  • 220 mm tall PMMA reservoir shows coolant clearly
  • Multiple mounting options include 120 mm bracket and DIY elbows

Specifications

TypeCPU Block

Questions about this item

Does the 220 mm reservoir station include every bracket needed for a 120 mm fan mount or must I source extra hardware?

The kit ships with a dedicated 120 mm mounting bracket (B-BKT-105) plus DIY elbow brackets, so no additional brackets are required for standard installation.

Should I choose the version with the digital temperature readout and 5 V ARGB or a simpler variant without those features?

This model is the only variant supplied; it integrates both the real-time temperature display and ultra-bright 5 V addressable RGB lighting as standard.

What does the 600 L/h flow-rate figure mean once the pump is running inside a custom loop?

At up to 5000 RPM the DDC pump delivers 600 L/h with a 6 m head, providing strong circulation for typical CPU and GPU blocks while reporting coolant temperature at 45 °C when spinning at 4000 RPM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.