We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 14mm rigid tubing fitting with G 1/4 thread

Bykski

Bykski B-HTJV2-L14 14mm Rigid Fitting V2 White diy cooling

SKU CH-P0H2-B9VVF MPN B-HTJV2-L14

Connects 14mm rigid tubing to G 1/4 threads in non-aluminium custom loops

  • TypeCPU Block
  • ColorWhite
  • G 1/4 thread fits standard water-block ports
  • 14mm OD accepts PETG, acrylic or metal tubing
  • White finish matches light-themed loop aesthetics
  • Non-aluminium loop compatibility prevents galvanic corrosion
  • Single fitting included for custom hard-tube runs

14mm rigid-tube fitting for custom loops

The Bykski B-HTJV2-L14 is a white compression fitting built for 14mm outside-diameter rigid tubing in PETG, acrylic or metal. It threads into any G 1/4 port on blocks, radiators or reservoirs. The part is sold new and intended for builders assembling a non-aluminium liquid-cooling loop.

G 1/4 thread and 14mm tube clamp

The fitting provides a standard G 1/4 male thread on one end and a compression collar that locks 14mm rigid tubing on the other. No additional adapters or tools are included in the single-piece package. The white finish matches white-themed builds without requiring separate paint or sleeves.

Non-aluminium loop compatibility only

This fitting must be used in loops that contain no aluminium components, as the materials are not rated for mixed-metal coolant paths. Builders with aluminium radiators or blocks should select a different fitting to avoid galvanic corrosion.

Highlights

  • G 1/4 thread fits standard water-block ports
  • 14mm OD accepts PETG, acrylic or metal tubing
  • White finish matches light-themed loop aesthetics
  • Non-aluminium loop compatibility prevents galvanic corrosion
  • Single fitting included for custom hard-tube runs

Specifications

TypeCPU Block
ColorWhite

Questions about this item

Will the O-rings on this G 1/4 thread fitting need periodic replacement?

The fitting uses standard G 1/4 threads with internal O-rings; inspect them when you drain the loop and replace if they show flattening or cracking.

What is the first limit reached when this 14 mm rigid fitting runs in a loop continuously?

The fitting itself has no moving parts; the practical limit is the pressure and temperature rating of the 14 mm PETG, acrylic or metal tubing you install.

Does this white rigid fitting add any noise, heat or power draw when the loop runs all day?

It is a passive brass fitting with no fan, pump or electronics, so it adds zero noise, negligible heat and no power consumption.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.