We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue VGA cable with male connectors at both ends, ferrite cores near each plug, 16.4 ft length

BUCIER

BUCIER VGA cable male to male 16.4 ft 15 pin ferrite cores

SKU CH-29YK-3H73F

A 16.4 ft VGA cable with 15-pin male connectors, ferrite cores and screw-in ends supports 1920x1080 resolution

Cable Length 16.4 Feet

Struck-through versions exist but are not stocked here.

  • Connects PC to monitor with 15-pin VGA ports
  • 4 ft length suits distant display placement
  • Ferrite cores reduce EMI and RFI interference
  • Supports 1920x1080P Full HD resolution
  • Molded strain relief and grip treads aid durability

15-pin VGA cable for legacy displays

This 16.4 ft male-to-male cable connects a VGA-equipped computer to a monitor, projector or screen with a 15-pin port. It supports resolutions including 800x600, 1024x768, 1600x1200 and 1920x1080 for LCD and LED panels. The screw-in connectors with grip treads and finger-tightened screws ensure a secure link. Ferrite cores are fitted to reduce crosstalk and shield against EMI and RFI.

Signal integrity over the full 16.4 ft run

Ferrite cores suppress high-frequency noise that can accumulate across a long analogue run, helping the cable sustain 1920x1080 without ghosting or colour shift. Moulded strain relief protects the solder joints from repeated connect-disconnect cycles. The screw-lock mechanism prevents accidental disconnection that would interrupt a presentation or monitoring session. Performance remains stable at the listed resolutions throughout the cable length.

Passive analogue link with no external power

The cable draws no power and adds no active circuitry, so it introduces no fan noise or heat into the installation. Ferrite cores are moulded into the heads, keeping the profile slim for routing behind desks or through conduit. Power consumption is limited to the signalling current from the source graphics port. The passive design suits permanent installs where silence and reliability are required.

Highlights

  • Connects PC to monitor with 15-pin VGA ports
  • 4 ft length suits distant display placement
  • Ferrite cores reduce EMI and RFI interference
  • Supports 1920x1080P Full HD resolution
  • Molded strain relief and grip treads aid durability

Specifications

No published specifications for this item yet.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 16.4 ft length cause signal loss or heat when running a 1920x1080 display all day?

The cable includes ferrite cores that minimise crosstalk and block EMI and RFI, so the 16.4 ft run stays stable at 1920x1080 without degradation or heat buildup.

What ports must my computer and monitor already have for this 15-pin male-to-male cable to work?

Both devices need a standard 15-pin VGA port; the screw-in connectors mate directly with no adapters required.

Will this cable work reliably with an older 800x600 SVGA monitor I still use?

Yes, the specification lists 800x600 (SVGA) alongside 1024x768, 1600x1200 and 1920x1080, so legacy SVGA displays are fully supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.