BUCIER
BUCIER VGA cable 15-pin male-to-male 6 ft ferrite cores
Connects a VGA-equipped computer to a monitor or projector at up to 1920x1080 resolution with ferrite cores to reduce interference
Struck-through versions exist but are not stocked here.
- Sharp 1080p video up to 1920x1080 resolution
- Stable signal from dual ferrite cores blocking EMI and RFI
- Secure fit with screw-in 15-pin connectors on both ends
- Durable build using molded strain relief and grip treads
- Ready for monitors, projectors and legacy displays with VGA ports
15-pin VGA cable for legacy displays
This six-foot male-to-male cable connects any computer or laptop with a 15-pin VGA output to a monitor, projector or screen that still uses the same port. It supports resolutions including 800x600, 1024x768, 1600x1200 and 1920x1080, making it suitable for older LCD and LED panels that lack digital inputs. The screw-in connectors provide a secure link for office, classroom or industrial setups where VGA remains the only video option.
Simple screw-in installation with ferrite shielding
Each end features finger-tightened screws and grip treads so the plugs seat firmly without tools. Molded strain relief protects the cable where it meets the connectors, reducing the risk of bent pins or broken wires during repeated hook-ups. Integrated ferrite cores suppress crosstalk, EMI and RFI, so signal quality stays clean even when the cable runs near power bricks or fluorescent lighting. The only common issue is forcing the screws on misaligned ports — always start them by hand.
Handles 1080p analogue video.
The cable comfortably carries 1920x1080 at 60 Hz over its full length, which covers most legacy monitors and projectors still in service. It cannot transmit audio, HDCP-protected streams or any digital protocol such as DVI-D, HDMI or DisplayPort — buyers needing sound or a purely digital link will need a different solution. Bandwidth limits also mean higher refresh rates or resolutions above 1080p are not supported.
Highlights
- Sharp 1080p video up to 1920x1080 resolution
- Stable signal from dual ferrite cores blocking EMI and RFI
- Secure fit with screw-in 15-pin connectors on both ends
- Durable build using molded strain relief and grip treads
- Ready for monitors, projectors and legacy displays with VGA ports
Specifications
No published specifications for this item yet.
Other versions of this model
4 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How can I verify the BUCIER VGA cable is delivering a clean 1920x1080 signal after connecting it?
Check that the display shows 1920x1080 at 60 Hz in your OS settings with no ghosting or colour fringing; the ferrite cores on this cable suppress EMI and RFI that cause those artefacts.
What comes with the BUCIER VGA cable and is any adapter needed for a standard 15-pin port?
The package contains the 6-foot 15-pin male-to-male cable with moulded strain-relief connectors, grip treads and finger-tightened screws; no separate adapter is required for any standard 15-pin VGA port.
Which resolution tier should I rely on when choosing this BUCIER cable for a 1080P monitor?
The cable is rated for 1920x1080P and up, so it fully supports 1080P monitors and also covers 1600x1200, 1024x768 and 800x600 modes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.







