BUCIER
BUCIER VGA cable 15-pin male to male 1.5 m blue
Connects monitors, projectors or PCs with a 15-pin screw-in VGA cable supporting up to 1920x1080 resolution over 1.5 metres
Cable Length 49.2 ft.
- 10 Feet
- 33 Feet
- 49.2 ft.
- 100 Feet
- 16.4 ft. / 5m
- 66 ft.
- 4.92 ft. / 1.5m
- Connect monitors and projectors with 15-pin VGA ports
- 5 m cable reaches nearby displays without excess slack
- Screw-in HDDB15 connectors secure the signal path
- Supports resolutions up to 1920x1080 for sharp Full HD images
- Works with PCs, laptops, TVs and projectors alike
VGA cable for monitors and projectors
This 1.5 m VGA cable connects PCs, laptops or other sources to monitors, projectors or TVs that use a 15-pin HDDB15 interface. The screw-in male-to-male plugs give a secure fit on both ends. It is suited for offices, classrooms or home setups where analogue video is still required.
Resolutions up to 1080P Full HD
The cable supports SVGA 800x600, XGA 1024x768, UXGA 1600x1200, WSXGA 1680x1050 and 1080P 1920x1080. At 1.5 m it handles these modes without difficulty. Longer runs or higher refresh rates at the top resolution may exceed the practical limit of analogue VGA signalling.
Passive analogue link no power or noise
As a passive copper cable it draws no power, produces no heat and makes no noise. The moulded strain relief and thumb screws keep the connection stable during normal use. No active electronics means there is nothing to fail from thermal stress.
Highlights
- Connect monitors and projectors with 15-pin VGA ports
- 5 m cable reaches nearby displays without excess slack
- Screw-in HDDB15 connectors secure the signal path
- Supports resolutions up to 1920x1080 for sharp Full HD images
- Works with PCs, laptops, TVs and projectors alike
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Will the 15-pin male connectors fit the VGA ports on my older 15-inch LCD monitor and legacy desktop tower?
Yes, the HDDB15 15-pin male-to-male connectors are the standard VGA interface used on older LCD monitors, CRT displays, projectors and desktop graphics cards, so they will mate directly with the ports on those devices.
How can I verify the cable is delivering a proper 1080P Full HD signal at 1920x1080 after connecting it?
Set the source computer to 1920x1080 at 60 Hz, then check the monitor's on-screen information menu — it should report the active resolution as 1920x1080 with no flicker, snow or missing colours across the 1.5 metre run.
Does the package include any adapters, ferrite cores or screws, or must I buy them separately?
The box contains only the single 1.5 metre blue VGA cable with integrated screw-in thumbscrews on each 15-pin plug; no adapters, ferrite beads or extra hardware are supplied.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








