We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short angled USB-C male to USB-A female cable, 20cm

BUCIER

BUCIER USB-C 3.1 to USB 3.0-A 10Gbps OTG Angled 20cm internal power cable

SKU CH-E2JF-M6217

Angled USB-C 3.1 to USB 3.0-A adapter cable supports 10Gbps data and 5V power with OTG function in a 20cm length

  • Connector Number1
  • OTG support enables direct device connections with 10Gbps data and 5V power
  • Reversible USB-C 3.1 plug inserts either way for hassle-free mating
  • 20cm angled cable fits tight internal spaces around crowded ports
  • Backward compatible with USB 2.0 at 480Mbps and USB 1.1 at 1.5Mbps
  • Data and power only — no video or audio pass-through supported

20 cm Angled USB-C Adapter

The BUCIER NF-UC-200-UP is a 20 cm internal cable with a USB-C 3.1 male connector angled for tight spaces and a USB 3.0 Type-A female port. It supports USB On-The-Go so compatible devices can act as a host for peripherals. The cable carries USB 3.0 data and 5 V power only.

Replaces Straight Cables In Cramped Builds

The right-angle Type-C plug fits where a straight connector blocks adjacent ports or case walls. The upgrade is worth it when clearance around the female port is too small for a standard cable. It does not add video, audio or alternate-mode signals to a USB 3.0 link.

Limited To USB 3.0 Signalling

The adapter passes SuperSpeed USB at 10 Gbps, Hi-Speed at 480 Mbps and Low-Speed at 1.5 Mbps, but it cannot transport DisplayPort, HDMI or other USB-C alternate modes. OTG host function works only with devices that implement the role swap in hardware. Cable length is fixed at 20 cm.

Highlights

  • OTG support enables direct device connections with 10Gbps data and 5V power
  • Reversible USB-C 3.1 plug inserts either way for hassle-free mating
  • 20cm angled cable fits tight internal spaces around crowded ports
  • Backward compatible with USB 2.0 at 480Mbps and USB 1.1 at 1.5Mbps
  • Data and power only — no video or audio pass-through supported

Specifications

BrandNFHK
ModelNF-UC-200-UP
Connector Number1

Questions about this item

Will the 20 cm angled USB-C plug fit behind my motherboard's rear I/O shield?

The 20 cm cable uses an up/down angled USB 3.1 Type-C male connector designed to mate with a female port even when surrounding space is limited.

Which orientation do I plug the reversible Type-C end in first to enable OTG?

Insert the reversible USB 3.1 Type-C male either way up; the OTG function activates automatically once the USB 3.0-A female receives a peripheral.

How often should I replace this 20 cm internal cable to keep 10 Gbps speeds?

No scheduled replacement is needed; the cable maintains USB 3.0 Super-Speed 10 Gbps, 5 Gbps, 480 Mbps and 1.5 Mbps ratings for its service life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.