We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic and metal adapter with a 19-pin female socket on one side and a USB 3.1 Type-E female header on the other

BUCIER

BUCIER USB 3.0 19 Pin to USB 3.1 Type-E 20 Pin Header Adapter PH73S

SKU CH-Z9SF-3DBNH

Converts a motherboard USB 3.0 19-pin header to a front-panel USB 3.1 Type-E port for Type-C devices at 5 Gbps

  • Type19 pin to type e 3.1
  • Color1 Pack
  • Cable Lengthinches
  • Changer Type19 pin to type e 3.1
  • Specifications19 pin to type e 3.1 Adapters device
  • Connector A19 pin to type e 3.1
  • Converts motherboard 19-pin header to front-panel USB 3.1 Type-E connector
  • PCI-bracket mounting secures the Type-C port for easy device access
  • Supports 5 Gbps USB 3.0 data rate without speed conversion
  • Draws up to 4.5 W from the motherboard header for connected devices
  • Compact 2.5 cm × 2.4 cm × 1 cm plastic-and-metal adapter weighs 12 grams

Front-panel header adapter

This BUCIER adapter converts a motherboard USB 3.0 19-pin header into a USB 3.1 Type-E port for a front-panel Type-C connector. It suits builders adding a modern front-panel port to a board that only exposes the older 19-pin header. The PH73S variant uses a straight 180-degree orientation for direct bracket mounting.

Build integration notes

The adapter draws up to 4.5 W from the USB 3.0 header and does not increase the 5 Gbit/s signal rate to 10 Gbit/s. It is not compatible with a USB 2.0 IDC connector and cannot supply the power needed for tablet charging. Install only after removing the power cable and waiting briefly to avoid shorting pins.

What the bundle changes

The single black plastic-and-metal unit adds a Type-E female header without requiring a new motherboard. It enables Type-C device connection at existing USB 3.0 speeds while fitting a standard PCI bracket slot. No driver installation is needed for the supported operating systems.

Highlights

  • Converts motherboard 19-pin header to front-panel USB 3.1 Type-E connector
  • PCI-bracket mounting secures the Type-C port for easy device access
  • Supports 5 Gbps USB 3.0 data rate without speed conversion
  • Draws up to 4.5 W from the motherboard header for connected devices
  • Compact 2.5 cm × 2.4 cm × 1 cm plastic-and-metal adapter weighs 12 grams

Specifications

BrandAAOTOKK
ModelAAOTOKK-USB30-31-TypeE
Type19 pin to type e 3.1
Color1 Pack
Cable Lengthinches
Changer Type19 pin to type e 3.1
Specifications19 pin to type e 3.1 Adapters device
Connector A19 pin to type e 3.1
Connector B19 pin to type e 3.1
FeaturesGaming
Weight12 grams
Package Quantity1

Questions about this item

What is the maximum data rate the PH73S adapter can sustain when connected to a USB 3.0 19-pin header?

The adapter passes through the USB 3.0 Gen 1 signal, so the sustained rate remains at 5 Gbps and cannot be increased to 10 Gbps.

How much power can the motherboard USB 3.0 header deliver through this adapter during all-day operation?

The header is rated at 4.5 W (0.9 A at 5 V); drawing more may trigger motherboard protection and shut the port down.

Which motherboard connector must already be present for the PH73S to function?

A USB 3.0 19-pin or 20-pin front-panel header is required; the adapter will not work with a USB 2.0 IDC connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.