We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black USB-to-RJ45 extender adapters, male and female ends

BUCIER

BUCIER USB 2.0 to RJ45 Extender Pair 150ft Cat5e Black

SKU CH-1PXG-BPMC3

Extends USB 2.0 devices up to 150 ft over Cat5e cable with a plug-and-play adapter pair

  • TypeUSB
  • Cat5E
  • Connector AUSB Type A
  • ColorBlack
  • Features, , , ,
  • Extends USB 2.0 devices up to 150 feet using Cat5e cable
  • Works over standard Cat5e patch cable up to 30 feet without signal loss
  • Compatible with USB 2.0 and USB 1.1 devices for broad device support
  • Plug-and-play operation with no external power supply required
  • Supports cameras, printers, keyboards, mice and other USB peripherals

USB 2.0 extender over Cat5e up to 150 ft

This pair of USB-to-RJ45 adapters lets you place a USB 2.0 device up to 150 feet from the host computer using standard Cat5e or Cat6 patch cable. The local unit plugs into a USB Type-A port while the remote unit provides a USB Type-A socket for the peripheral. It is designed for cameras, printers, keyboards, mice and similar low-bandwidth devices.

Works with ordinary Cat5e cable up to 30 ft

For runs under 30 feet a regular Cat5e patch cord is sufficient; longer links require a high-quality cable with 0.5 mm solid copper conductors to avoid instability. The adapters draw power from the USB bus so no external supply is included, though a hard drive may need a dual-head USB power cable if the bus cannot deliver enough current.

Check cable quality and device power needs

Verify that your patch cable meets the 0.5 mm solid-core specification before installing runs beyond 30 feet. Confirm the target peripheral does not exceed the bus-power budget, because the extender cannot supply extra current on its own. Performance may drop to USB 1.1 speeds depending on cable length and the specific device connected.

Highlights

  • Extends USB 2.0 devices up to 150 feet using Cat5e cable
  • Works over standard Cat5e patch cable up to 30 feet without signal loss
  • Compatible with USB 2.0 and USB 1.1 devices for broad device support
  • Plug-and-play operation with no external power supply required
  • Supports cameras, printers, keyboards, mice and other USB peripherals

Specifications

BrandBUCIER
TypeUSB
Cat5E
Connector AUSB Type A
ColorBlack
Features, , , ,

Questions about this item

Does the 150ft USB 2.0 extender pair need any replacement parts or maintenance after installation?

The pair is self‑powered and plug‑and‑play with no driver, so no routine maintenance is required; only the Cat5e/6 patch cable between the two adapters may need replacing if it is damaged.

What distance limit appears first when the extender runs continuously at USB 2.0 speed?

Ordinary network cable works reliably up to 30 feet; beyond that you must use high‑quality Cat5e/6 cable with 0.5 mm copper cores to reach the full 150 ft without instability.

How much heat or power draw should I expect from the adapters when they run all day?

Both adapters are self‑powered from the USB bus and draw no external power, so heat output is minimal and limited to the normal USB 2.0 port supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.