BUCIER USB 2.0 A Male to B Mini 5 Pin Female Adapter 3 Pack

Three-pack USB 2.0 A Male to Mini-B Adapter

This three-pack supplies USB 2.0 A Male to USB B Mini 5 Pin Female adapters for connecting legacy Mini-B devices such as older cameras, external drives or GPS units to standard USB-A ports. Each adapter handles data transfer speeds up to 480 Mbps and is fully shielded to reduce EMI. The compact black housing measures 16.1 mm by 17.2 mm by 10.3 mm and weighs 7.6 g. Buyers needing Micro-B, USB-C or USB 3.0 speeds cannot use these adapters.

Plug-and-play installation with shielding

Installation requires no drivers; simply insert the Mini-B cable into the female end and plug the USB-A male end into the host port. The fully shielded construction helps prevent signal degradation from nearby electronics. A common issue is forcing the Mini-B connector upside down, which can bend the delicate five-pin socket. Users should also verify the device draws no more power than the host port can supply, as the adapter adds no external power capability.

Steady 480 Mbps throughput under load

During sustained transfers the adapter maintains the USB 2.0 High-Speed rating of 480 Mbps without thermal throttling, thanks to its low-mass plastic shell and short signal path. The gold-plated contacts resist oxidation over repeated mating cycles. Performance will remain limited to USB 2.0 bandwidth even when connected to USB 3.0 or 3.1 ports, so large multi-gigabyte archives will move slower than on a native high-speed interface.