We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black cable with a white 4-pin IDE plug branching into five black 15-pin SATA sockets spaced along 60cm

BUCIER

BUCIER TS43 4-pin IDE to 5 x 15-pin SATA power splitter 60cm

SKU CH-8SDM-SPQG2

Converts a 4-pin IDE connector into five 15-pin SATA power ports spaced 11 cm apart using 18 AWG tinned copper wire over 60 cm

  • TypeSATA
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • FeaturesData Transfer
  • Converts one 4-pin IDE connector into five 15-pin SATA power ports
  • 18AWG tinned copper conductors deliver stable high-current power to every drive
  • 60 cm total length with 11 cm spacing between each SATA connector
  • Flat ribbon layout keeps wires neat for clean routing and easy perforation
  • Supports HDD, SSD, CD and DVD drives from a single power source

Power-splitter for legacy drives

This BUCIER TS43 cable converts a single 4-pin IDE connector into five 15-pin SATA power sockets, letting older power supplies feed modern hard drives, SSDs and optical drives. It is aimed at system builders who need to populate multiple drive bays without adding extra PSU cables.

Sustained-load behaviour

The 18AWG 1007 tinned-copper conductors are rated for continuous high-current delivery across all five outputs simultaneously. Parallel wiring keeps voltage drop low even when several drives spin up together, so the supply remains stable during prolonged read-write sessions.

Interface practical limits

Each SATA power plug is spaced roughly 11cm apart along the 60cm total length, which restricts how far apart drives can be mounted in a large chassis. The flat ribbon layout eases routing through tight grommets but cannot reach drives positioned beyond the fixed connector spacing.

Highlights

  • Converts one 4-pin IDE connector into five 15-pin SATA power ports
  • 18AWG tinned copper conductors deliver stable high-current power to every drive
  • 60 cm total length with 11 cm spacing between each SATA connector
  • Flat ribbon layout keeps wires neat for clean routing and easy perforation
  • Supports HDD, SSD, CD and DVD drives from a single power source

Specifications

BrandXMSJSIY
ModelTS43
TypeSATA
Connector DetailSata
Terminal GenderMale-to-Female
FeaturesData Transfer

Questions about this item

Does the 18AWG tinned-copper wire handle continuous load without overheating?

The 18AWG tinned-copper conductors are rated for high-current supply and maintain stable delivery across all five SATA connectors.

Will this splitter work straight from a standard 4-pin Molex output on my PSU?

Yes, the 4-pin IDE male plug connects directly to any standard Molex peripheral output; no extra adapters are required.

Can I daisy-chain this off an older 4-pin rail that also feeds a legacy IDE drive?

The splitter draws from the same 4-pin rail, so total current must stay within that rail's limit; the 11 cm spacing between SATA ports keeps cable routing tidy alongside older drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.