We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small gold 3.5 mm TRS jacks with three screw terminals each

BUCIER

BUCIER SHAN-23 3.5 mm TRS to 3 screw terminal adapter 2-pack

SKU CH-0HKX-2B7F8

Connects bare wires to a 3.5 mm TRS jack using gold-plated screw terminals, no soldering required

  • SpecificationsSHANFEILU
  • Connector AAuxiliary
  • Connector PlatingGold
  • Weight0.01 kilograms
  • Package Quantity1
  • Solder-free wiring with three screw terminals for quick audio connections
  • Gold-plated contacts ensure reliable signal transfer and long-term durability
  • 5 mm TRS female jack fits standard stereo plugs on phones and PCs
  • Two adapters in one pack for stereo or spare use
  • Lightweight design at 0.01 kg adds minimal bulk to projects

Solderless 3.5 mm TRS adapter pair

The BUCIER SHAN-23 pack contains two gold-plated adapters that convert a 3.5 mm stereo TRS jack to a three-screw terminal block. Installers can terminate stranded or solid-core wire with a small screwdriver, avoiding any soldering work. The connectors suit custom audio wiring jigs, headphone cable repairs or quick AV test leads. Each unit weighs 0.01 kilograms.

Check jack polarity and wire gauge before ordering

The adapter presents a 3.5 mm three-pole female socket on one side and three screw terminals on the other. Verify that your source or load uses a standard TRS pin-out rather than a TRRS headset layout. Ensure the wire cross-section fits the terminal openings and that the screw terminals accept the conductor type you plan to use. No soldering tools are required.

Two adapters enable stereo channel separation

The twin-pack lets builders wire left and right channels independently or keep a spare for field repairs. Gold plating on the contacts resists oxidation for reliable signal transfer over repeated mating cycles. The solderless design speeds up prototyping and on-site fixes compared with traditional soldered terminals. Both units are supplied new in the same package.

Highlights

  • Solder-free wiring with three screw terminals for quick audio connections
  • Gold-plated contacts ensure reliable signal transfer and long-term durability
  • 5 mm TRS female jack fits standard stereo plugs on phones and PCs
  • Two adapters in one pack for stereo or spare use
  • Lightweight design at 0.01 kg adds minimal bulk to projects

Specifications

BrandBUCIER
ModelSHAN-23
SpecificationsSHANFEILU
Connector AAuxiliary
Connector PlatingGold
Weight0.01 kilograms
Package Quantity1

Questions about this item

Does the 2-pack include everything needed to connect bare wires to a 3.5 mm TRS jack, or must I buy a screwdriver separately?

The pack contains two SHAN-23 adapters, each with a 3.5 mm 3-pole female jack and a 3-screw terminal block. A small screwdriver is required to tighten the terminals and is not included.

Should I choose the SHAN-23 for a stereo headphone cable or a mono microphone lead?

The SHAN-23 provides a 3-pole TRS connection (tip, ring, sleeve), so it suits stereo audio or a combined headset with microphone. It is not a 4-pole TRRS adapter.

What does the gold-plated 3.5 mm jack actually do for signal quality in a home audio setup?

Gold plating resists corrosion and maintains low contact resistance, giving reliable signal transfer for line-level or headphone-level audio without the degradation that oxidised contacts can cause.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.