BUCIER
BUCIER SHAN-21 3.5mm TRRS Male to 4 Screw Terminal Adapter 2-Pack
Two solderless 3.5 mm TRRS male plugs break out to four screw terminals each for custom audio wiring
- SpecificationsSHANFEILU
- Connector AAuxiliary
- Connector PlatingGold
- Weight0.02 kilograms
- Package Quantity1
- Solderless wiring with just a small screwdriver
- Gold-plated contacts for reliable signal transfer
- TRRS male plug carries stereo audio plus microphone
- Four screw terminals map to left, right, mic and ground
- Two adapters included for multiple connections
TRRS adapter for custom wiring
This BUCIER SHAN-21 adapter converts a 3.5mm 4-pole male plug to four screw terminals. It suits installers and hobbyists who need a solderless connection for microphone, earphone or audio-video signals. The gold-plated contacts ensure reliable signal transfer across left, right, microphone and ground channels. Two adapters are included in the pack.
Passive connector with no active cooling
The adapter is a passive component that draws no power and generates no heat during normal use. It operates silently because it contains no fans, electronics or moving parts. Signal quality depends on the tightness of the screw terminals and the wire gauge chosen by the installer. No external power supply is required for operation.
Screw terminals replace soldering
Each terminal accepts stranded or solid-core wire secured by a small screw, removing the need for solder, crimps or electrical tape. The four terminals are labelled for left, right, microphone and ground to simplify wiring. This design allows quick reconfiguration of custom cables or test jigs in the field. The pack provides two identical units for stereo or duplicate connections.
Highlights
- Solderless wiring with just a small screwdriver
- Gold-plated contacts for reliable signal transfer
- TRRS male plug carries stereo audio plus microphone
- Four screw terminals map to left, right, mic and ground
- Two adapters included for multiple connections
Specifications
| Brand | BUCIER |
|---|---|
| Model | SHAN-21 |
| Specifications | SHANFEILU |
| Connector A | Auxiliary |
| Connector Plating | Gold |
| Weight | 0.02 kilograms |
| Package Quantity | 1 |
Questions about this item
How do I install the SHAN-21 adapter without soldering, and what step do people often miss?
Strip each wire, insert it into the correct screw terminal — L, R, V, or Ground — then tighten the small screw; the step often missed is matching each conductor to its labelled terminal before securing.
What maintenance or replacement will the SHAN-21 need later?
The gold-plated contacts resist corrosion, so only occasional re-tightening of the four terminal screws is needed if vibration loosens them over time.
What limit appears first when the SHAN-21 is used continuously?
The 3.5 mm TRRS plug and screw-terminal block are passive, so the first limit is the current rating of the connected wires, not the adapter itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



