We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue SFF-8643 to four SATA breakout cables, each 3.3 ft long

BUCIER

BUCIER SFF-8643 to 4 SATA breakout cable 3.3FT 2-pack

SKU CH-3KKS-3RVJ1

Two SFF-8643 to 4 SATA breakout cables, each 3.3 ft long, connect a SAS RAID controller to four SATA drives at 6 Gbps per drive

  • TypeSAS to SATA
  • ColorBlack/Blue
  • Length3.3
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • 2-pack gives spare cables for multi-drive builds
  • 3 ft length fits compact server chassis
  • SFF-8643 male to four SATA female connectors links controller to drives
  • Locking latches on both ends secure connections against vibration
  • 30 AWG conductors keep cable flexible for tight routing

Two-Cable Kit for Mini-SAS HD Controllers

This 2-pack provides a pair of SFF-8643 to 4 SATA breakout cables, each 3.3 feet long. The cables connect a single Mini-SAS HD (SFF-8643) male host port on a SAS RAID controller or motherboard to four SATA 7-pin female target devices such as hard drives or a backplane. Copper conductors support data transfer rates up to 6 Gbps per drive.

Builders Expanding Internal Storage with SAS Hosts

The kit suits professionals or DIY enthusiasts adding multiple SATA drives to a system equipped with a 12 Gbps SAS HBA or RAID controller featuring an SFF-8643 port. Locking latches on both the Mini-SAS HD and SATA connectors ensure secure internal connections. Buyers whose backplane or target device uses a Mini-SAS HD connector instead of native SATA ports should look elsewhere, as the cable will not function in that orientation.

Single SFF-8643 Port Fans Out to Four SATA Drives

The decisive specification is the forward breakout topology: one SFF-8643 male host connector splits into four SATA 7-pin female connectors per cable. This fixed 1-to-4 lane mapping determines whether the cable matches the controller port count and the number of drives being attached.

Highlights

  • 2-pack gives spare cables for multi-drive builds
  • 3 ft length fits compact server chassis
  • SFF-8643 male to four SATA female connectors links controller to drives
  • Locking latches on both ends secure connections against vibration
  • 30 AWG conductors keep cable flexible for tight routing

Specifications

BrandADCAUDX
ModelADCAUDX-SFF8643-33FT
TypeSAS to SATA
ColorBlack/Blue
Length3.3
Connector DetailSata
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

Will the 30 AWG conductors handle sustained 6 Gbps transfers without signal loss?

The 30 AWG copper conductors are rated for 6 Gbps per SATA lane and include locking latches on both ends to maintain a secure connection during continuous operation.

Does the SFF-8643 connector run hot or draw extra power when all four drives are active?

The cable is passive and carries only signal and ground; it adds no active circuitry, so it generates no measurable heat and draws no power beyond what the controller supplies.

What controller port must I already have to plug in the SFF-8643 male end?

You need a 12 Gbps SAS HBA or RAID controller with an internal HD Mini-SAS SFF-8643 male port; the cable will not work if connected to a backplane SFF-8643 port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.