We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black and blue nylon-braided SATA cables, straight to 90-degree connectors, 1 metre each

BUCIER

BUCIER SATA-III Cable 1M 6Pcs 90-Degree Straight to Right Angle 6Gbps SATA 30 AWG Nylon Braided 3.3FT

SKU CH-H8E7-6J0CC

Six 1 metre SATA III cables with straight-to-90-degree connectors support 6 Gbps transfers for SSDs, HDDs and optical drives

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length3.3
  • Speed6 gigabits_per_second
  • Conductornylon
  • Six cables in one pack simplify multi-drive builds
  • Right-angle connectors fit tight server or RAID chassis
  • Nylon braid bundles six runs for clean cable routing
  • 6 Gbps SATA III speed with SATA I/II backward support
  • 30 AWG conductors and locking latches ensure stable data transfer

Six-Cable SATA III Kit

This set supplies six SATA III data cables, each one metre long, for linking internal drives to motherboards or host controllers. Every cable carries a straight connector on one end and a 90-degree right-angle connector on the other, allowing tidy routing in tight chassis. The nylon-braided sheath bundles the six leads together and each lead is labelled P1 to P6 for quick identification during RAID or multi-drive builds.

Builders Who Need Angled Data Links

The straight-to-right-angle layout suits servers, workstations or compact cases where a straight plug would foul adjacent components or drive cages. Each cable supports the 6 Gbps SATA III rate and remains backward compatible with SATA I and SATA II drives, so older mechanical disks and newer SSDs both work without configuration. Buyers who require power delivery or a different connector type should look elsewhere, as these are data-only SATA links.

Locking Latch for Secure Insertion

Every connector includes a locking latch that clicks into the drive or motherboard port, preventing accidental disconnection from vibration or cable strain. The 30 AWG conductors are rated for the full 6 Gbps specification, so the link speed is limited only by the attached drive or controller. This single mechanical feature decides whether the cable stays seated in high-density or mobile environments.

Highlights

  • Six cables in one pack simplify multi-drive builds
  • Right-angle connectors fit tight server or RAID chassis
  • Nylon braid bundles six runs for clean cable routing
  • 6 Gbps SATA III speed with SATA I/II backward support
  • 30 AWG conductors and locking latches ensure stable data transfer

Specifications

BrandADCAUDX
ModelSATA-011
TypeSATA Cables
ColorBlack/Blue
Length3.3
Speed6 gigabits_per_second
Conductornylon

Questions about this item

What does the SATA III interface cap the transfer rate at in practice?

The cable supports up to 6 Gbps, but actual throughput is limited by the rating of the connected equipment.

What physical space does the 90-degree connector need to fit?

The right-angle plug is designed for tight spaces and the 1 metre length helps route cables in compact cases.

How are these cables installed and what step is often missed?

Connect the straight end to the motherboard and the 90-degree end to the drive; ensure the locking latch clicks for a secure link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.