We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black and blue SATA cables, each 1.6 ft long, right-angle to straight connectors, nylon braided, labelled P1 to P6

BUCIER

BUCIER SATA-III Cable 0.5M 6pcs 90-Degree Right-Angle to Straight 6Gbps

SKU CH-57WS-EAA0C

Six 0.5 m SATA-III cables with one straight and one 90-degree connector support 6 Gbps transfers for SSDs, HDDs and optical drives

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length1.6
  • Terminal GenderFemale-to-Female
  • Speed6 gigabits_per_second
  • Conductornylon
  • Half-metre length keeps server bays tidy
  • 6 Gbps SATA III speed moves large volumes fast
  • 90-degree right-angle plug fits cramped drive cages
  • Nylon-braided sleeve protects six labelled cables
  • Backwards compatible with SATA I and SATA II drives

Six-Pack 90-Degree SATA Data Cables

This set supplies six SATA-III cables, each 0.5 metres long, with a straight connector on one end and a 90-degree right-angle plug on the other. They link motherboards or host controllers to 2.5-inch SSDs, 3.5-inch HDDs, optical drives or RAID controllers. The nylon-braided jacket keeps the bundle tidy in tight chassis and each cable carries a P1-to-P6 label for simple routing. No software or drivers are required.

6 Gbps Throughput With Backwards Headroom

Rated at 6 Gbps, the cables support the full SATA-III bandwidth while remaining compatible with SATA I and II devices. Actual transfer speed is limited by the slowest attached component, so a SATA-II drive will not exceed its own ceiling. The conductors are built to a 12G high-speed SAS specification for signal integrity, yet the cables carry data only — drives must receive power from a separate source.

Replaces Loose Or Mismatched Leads

Builders replacing a tangle of assorted lengths gain uniform 0.5-metre runs that fit compact server or RAID enclosures. The right-angle ends ease insertion where a straight plug would press against a side panel or adjacent card. Buyers who need longer reaches, external eSATA connections or combined data-and-power leads will not find those functions here.

Highlights

  • Half-metre length keeps server bays tidy
  • 6 Gbps SATA III speed moves large volumes fast
  • 90-degree right-angle plug fits cramped drive cages
  • Nylon-braided sleeve protects six labelled cables
  • Backwards compatible with SATA I and SATA II drives

Specifications

BrandADCAUDX
ModelSATA-011
TypeSATA Cables
ColorBlack/Blue
Length1.6
Terminal GenderFemale-to-Female
Speed6 gigabits_per_second
Conductornylon

Questions about this item

Will the 90-degree SATA connectors fit alongside existing 2.5 or 3.5 drives in a tight server chassis?

The right-angle design keeps the cable close to the drive body, and the thin nylon-braided 12G SAS conductors allow easier routing in confined spaces.

How can I confirm each of the six cables is delivering 6Gbps throughput after installation?

Verify the host controller reports a SATA 6Gbps link speed for every port and run a sequential read test that saturates the interface.

The pack lists six labelled data cables — are power leads or mounting screws included?

Only the six 0.5M SATA 7-pin data cables are supplied; drive power must come from the PSU and screws from the chassis or drive kit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.