We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three red SATA cables with 90 degree connectors and locking latches

BUCIER

BUCIER SATA Cable III 3 Pack 90 Degree 6Gbps Locking Latch 50cm 18 Inch Red

SKU CH-6P8P-Q5RQF

Three-pack of 50 cm red SATA 3.0 cables with 90-degree locking connectors for secure 6 Gbps drive links

  • ColorRed
  • 6 Gbps peak throughput with SATA 3.0 support
  • 1 GB file transferred in about 5 seconds
  • Three cables included for RAID or spare builds
  • 90-degree straight connectors with locking latches on both ends
  • Tinned copper core and aluminium foil shield reduce interference

Three-pack SATA III cables for storage builds

This three-pack of red SATA III cables connects internal hard drives, SSDs and optical drives to a motherboard or host controller. Each cable measures 50 cm (18 in) and supports the 6 Gbps SATA 3.0 standard while remaining backwards compatible with earlier revisions. The pack is suited for system builders who need spare or replacement links for RAID arrays or multiple drive bays.

Right-angle connectors with locking latches

Both ends of every cable carry a straight 90 degree connector fitted with a locking latch that clicks into the port to resist vibration and accidental disconnection. The right-angle profile helps route the cable along tight chassis spaces without sharp bends. Installation is a simple push until the latch engages; the only common issue is forgetting to depress the latch before pulling the cable free, which can strain the port.

Check port orientation and device spacing

Verify that your motherboard and drive SATA ports accept a right-angle plug without blocking adjacent sockets or clashing with large heatsinks. Confirm the 50 cm length reaches from your chosen port to the drive tray in your case layout. Ensure the connected drives and controller support SATA 3.0 to obtain the rated 6 Gbps throughput; the cable itself cannot overcome slower host or device limits.

Highlights

  • 6 Gbps peak throughput with SATA 3.0 support
  • 1 GB file transferred in about 5 seconds
  • Three cables included for RAID or spare builds
  • 90-degree straight connectors with locking latches on both ends
  • Tinned copper core and aluminium foil shield reduce interference

Specifications

ColorRed

Questions about this item

How can I confirm the 6 Gbps SATA III cable is running at full speed after connecting my SSD?

Check your motherboard BIOS or OS drive information to verify the link negotiates at SATA 6 Gbps; the cable supports Revision 3.0 and is backward compatible with SATA I and II.

What comes in the package and do I need any extra parts to install the 90 degree cables?

The pack contains three red SATA III cables, each 50 cm long with straight and 90 degree locking connectors; no additional components are required for standard drive installation.

Which cable orientation should I choose for a tight space behind a 2.5 inch SSD?

Use the 90 degree right-angle end on the drive side to reduce cable strain in confined bays; the straight end connects to the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.