We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three straight SATA cables with locking metal latches, 16 inch length

BUCIER

BUCIER SATA Cable III 3 Pack 6Gbps Locking Latch 16 Inch (40cm)

SKU CH-XNC6-M2D1A

Three SATA III cables with locking metal latches support 6 Gbps data transfer and connect HDDs, SSDs or optical drives to a motherboard

  • 6 Gbps data transfer supported by SATA 3.0 specification
  • Three cables included for multiple drive installations
  • Locking metal latch secures connection against vibration
  • 16 inch (40 cm) length fits standard case layouts
  • Backwards compatible with SATA I and SATA II drives

Three-cable pack with locking latch

This three-pack supplies straight-to-straight SATA data cables for connecting hard drives, solid-state drives or optical drives to a motherboard or host controller. Each cable carries a locking metal latch to prevent accidental disconnection from vibration or movement. The phosphor-copper plugs and eight tinned copper wires support the SATA 3.0 specification up to 6 Gbps.

Check connector orientation and port spacing

Verify that your drives and motherboard use straight SATA ports rather than right-angle variants, as these cables are straight on both ends. Ensure the 16 inch (40 cm) length reaches between your storage devices and the motherboard SATA headers without strain. Confirm your system has enough free SATA ports for the number of drives you intend to add.

Sustained transfer limited by drive rating

The cables are rated for the SATA 3.0 maximum of 6 Gbps, but actual sustained throughput is governed by the connected drive and controller capabilities. Dual-channel construction with separate shielding helps maintain signal integrity during continuous read or write workloads. Backwards compatibility with SATA I and SATA II ensures operation with older drives at their native speeds.

Highlights

  • 6 Gbps data transfer supported by SATA 3.0 specification
  • Three cables included for multiple drive installations
  • Locking metal latch secures connection against vibration
  • 16 inch (40 cm) length fits standard case layouts
  • Backwards compatible with SATA I and SATA II drives

Specifications

No published specifications for this item yet.

Questions about this item

Does the three-pack include everything needed to connect three drives, or are extra brackets or screws required?

The pack supplies three straight-to-straight SATA data cables with locking metal latches; no brackets, screws or power cables are included.

When should I choose the 16-inch length over a longer cable?

The 16-inch (40 cm) length suits tight chassis layouts or short motherboard-to-drive runs where excess cable would block airflow.

What does the 6 Gbps rating mean once the cable is installed in my system?

The cable supports the SATA 3.0 specification up to 6 Gbps, but actual throughput is limited by the drive and controller you connect it to.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.