We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white SATA cables with straight locking connectors, eighteen inches long

BUCIER

BUCIER SATA Cable III 3-pack 6Gbps 18in White

SKU CH-MM9R-T1X5D

Three SATA 3.0 cables with locking latches connect drives at up to 6 Gbps, each 18 inches long in white

  • ColorWhite
  • Three cables in one pack supply spares for multiple drives or RAID builds
  • Locking latch on each connector prevents accidental disconnection during operation
  • SATA 3.0 interface supports up to 6 Gbps transfer rates
  • Backwards compatible with SATA I and SATA II devices
  • 18 inch length suits standard desktop chassis routing

Three-cable pack for SATA storage

This three-pack supplies 18-inch SATA cables with straight connectors and locking latches. Each cable supports the 6 Gbps SATA 3.0 interface and is coloured white for easy identification. The bundle suits builders adding multiple hard drives, SSDs or optical drives in one session.

Replaces worn or missing SATA leads

Use these cables when existing leads are damaged, too short or lack a locking latch. The 6 Gbps rating doubles the throughput of the older 3 Gbps revision while remaining backward compatible with earlier SATA devices. The jump is worth it whenever you need reliable full-speed links for several drives at once.

Check port orientation and device spacing

Verify that your motherboard and drive ports accept straight connectors without interference from nearby components. Confirm the 18-inch length reaches between your intended drive bays and the motherboard SATA headers. Ensure your system uses standard SATA power and data ports rather than proprietary drive trays.

Highlights

  • Three cables in one pack supply spares for multiple drives or RAID builds
  • Locking latch on each connector prevents accidental disconnection during operation
  • SATA 3.0 interface supports up to 6 Gbps transfer rates
  • Backwards compatible with SATA I and SATA II devices
  • 18 inch length suits standard desktop chassis routing

Specifications

ColorWhite

Questions about this item

What drive spacing does the 18-inch length suit?

The 18-inch cable reaches between drives and motherboard headers in standard ATX cases without excess slack.

How does the locking latch engage on the SATA 3.0 connector?

Press the connector straight in until the metal latch clicks over the drive port tab; angled insertion leaves the latch unseated.

When should a cable from the 3-pack be replaced?

Replace a cable if the latch no longer holds, the plug wiggles in the port, or data errors appear during large transfers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.