We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black and blue nylon-braided SATA cables, straight to 90-degree angled, 0.5 m each

BUCIER

BUCIER SATA cable 0.5 m 4-pack 90-degree angled to straight 6 Gbps

SKU CH-B1K9-TDDAH

Four 0.5 m SATA data cables with 90-degree angled and straight connectors, supporting 6 Gbps transfers for SSDs, HDDs and optical drives

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length1.6
  • Speed6 gigabits_per_second
  • Conductornylon
  • Connect drives in tight bays with 90-degree right-angle connectors
  • Achieve 6 Gbps transfer rates under SATA III specification
  • Manage four cables cleanly using the nylon-braided bundle
  • Secure each link with locking-latch SATA 7-pin ends
  • Install instantly with no software required across 2.5 and 3.5-inch drives

What this is

This is a pack of four SATA III data cables, each .5 m long, with a straight connector on one end and a 90-degree angled connector on the other. They support up to 6 Gbps transfer rates and are built with 30 AWG conductors wrapped in a nylon braid. The cables connect motherboards or host controllers to internal hard drives, SSDs, optical drives or RAID controllers.

What to check before ordering

Verify that your drives and motherboard use standard SATA 7-pin data ports and that you have a separate power connection for each drive, because these cables carry data only. Confirm that the 90-degree orientation matches the clearance around your drive bays or backplane. The cables are labelled P1 to P4 to help with routing in multi-drive or RAID setups.

What this replaces or upgrades

These cables replace older SATA I or SATA II leads and work with existing drives thanks to backward compatibility. The shorter .5 m length and angled ends reduce clutter in tight server cases or compact builds where longer straight cables would block airflow. The upgrade is worthwhile when you need secure locking latches and thinner, managed routing for high-density storage arrays.

Highlights

  • Connect drives in tight bays with 90-degree right-angle connectors
  • Achieve 6 Gbps transfer rates under SATA III specification
  • Manage four cables cleanly using the nylon-braided bundle
  • Secure each link with locking-latch SATA 7-pin ends
  • Install instantly with no software required across 2.5 and 3.5-inch drives

Specifications

BrandADCAUDX
ModelSATA-011
TypeSATA Cables
ColorBlack/Blue
Length1.6
Speed6 gigabits_per_second
Conductornylon

Questions about this item

Does the four-cable pack include power connectors or only data cables?

The pack contains four SATA data cables only; each drive still needs a separate power connection from the PSU.

Should I choose the straight-to-90-degree version or a straight-to-straight cable for my build?

The 90-degree plug fits tight spaces behind drive cages, while the straight end connects cleanly to motherboard ports.

Will the 6 Gbps rating actually give me 6 Gbps throughput on my SSD?

The cable supports up to 6 Gbps, but real-world speed is limited by the drive and controller you attach.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.