We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black right-angle SATA 7-pin adapters with locking latches

BUCIER

BUCIER SATA 7Pin Right-Angle Adapter 90° Black 2-pack

SKU CH-QZGA-P9TWP

Right-angle SATA 7-pin adapter redirects cables 90 degrees in tight chassis, supports 600 MB/s data rates, and includes a locking latch for secure connections in a two-pack

  • ColorBlack - 2 Up
  • Connector DetailSata 7pin Male to Female
  • Conductorcopper
  • Solves tight clearances with a 90° right-angle design
  • Supports 600 MB/s data rates via SATA III
  • Locking latch prevents accidental disconnection
  • Copper conductors ensure reliable signal integrity
  • Two adapters included for multiple drives

90° SATA adapter for tight builds

This BUCIER right-angle adapter changes a vertical SATA 7-pin port to a horizontal one. It fits desktops where chassis height or drive placement blocks a straight cable. The 2-pack lets you reroute two connections at once. Builders working in compact cases or behind stacked drives will find the 90-degree turn essential.

Replaces straight SATA cables that foul on lids

Swap a standard cable for this adapter when a side panel, graphics card or drive cage leaves no headroom. The jump is worth it whenever a straight plug would bend sharply or press against metal. If your current cable already routes cleanly without stress, the adapter adds no benefit.

Limited to SATA III 6 Gbit/s electrical performance

The copper conductors and locking latch meet the SATA III spec for 600 MB/s throughput. No signal conditioning or active circuitry is present, so cable length and host-controller quality still set the real-world ceiling. The adapter cannot compensate for a marginal host port or a cable run that exceeds the standard's passive reach.

Highlights

  • Solves tight clearances with a 90° right-angle design
  • Supports 600 MB/s data rates via SATA III
  • Locking latch prevents accidental disconnection
  • Copper conductors ensure reliable signal integrity
  • Two adapters included for multiple drives

Specifications

BrandGELRHONR
ColorBlack - 2 Up
Connector DetailSata 7pin Male to Female
Conductorcopper

Questions about this item

Will the 90° right-angle body clear a low-profile case roof?

The 90° design lets the cable run horizontally from the motherboard header, keeping the connector flush against the drive so it fits under tight chassis ceilings.

Does the locking latch click onto a standard SATA 7-pin header without extra force?

Yes, the latch engages the standard SATA 7-pin male header on the board or drive; press straight in until you feel the click — angling the plug is the common mistake.

If the latch tab snaps off after repeated swaps, can I replace just the adapter?

The pack includes two identical adapters, so a spare is already on hand if a latch breaks during drive changes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.