BUCIER
BUCIER SATA 6G 2-in-1 Power Data Cable 22-pin LP4 IDE to SATA 19.7in 2-pack
Connects a 22-pin SATA drive to an LP4 power and SATA data port at 6 Gbps, 19.7 in, two-pack
- TypeSATA
- ColorBlack
- Connector DetailSata
- Terminal GenderMale-to-Female
- Speed6 gigabits_per_second
- Combines power and data in one 22-pin cable
- Supports 6 Gbps SATA III transfer speeds
- Backward compatible with SATA I and SATA II
- 7 inch length with 26 AWG oxygen-free copper
- Two cables included for multiple drive connections
2-in-1 SATA power and data cable
This 22-pin cable combines a 15-pin power connector and a 7-pin data connector into a single assembly, converting an LP4 IDE 4-pin source to SATA for hard drives, SSDs or optical drives. It suits builders adding SATA storage to older power supplies or extending existing SATA runs without extra cables.
Check LP4 source and device connectors
Verify that your power supply or adapter provides a standard LP4 4-pin Molex output and that the target drive uses a native SATA 15-pin power plus 7-pin data interface. The cable is 19.7 inches (50 cm) long, so measure the routing path inside your chassis to confirm reach before ordering.
Sustained 6 Gbps transfer with oxygen-free copper
The 26 AWG oxygen-free copper cores maintain SATA III 6 Gbps speeds during extended reads and writes, limited only by the connected drive’s rating. Braided insulation prevents heat build-up under continuous load, and the latch-equipped data connector resists vibration-induced disconnects during long RAID rebuilds or large file copies.
Highlights
- Combines power and data in one 22-pin cable
- Supports 6 Gbps SATA III transfer speeds
- Backward compatible with SATA I and SATA II
- 7 inch length with 26 AWG oxygen-free copper
- Two cables included for multiple drive connections
Specifications
| Brand | XMSJSIY |
|---|---|
| Model | XMSJSIY Round |
| Type | SATA |
| Color | Black |
| Connector Detail | Sata |
| Terminal Gender | Male-to-Female |
| Speed | 6 gigabits_per_second |
Questions about this item
What does the 22-pin 2-in-1 cable include so I do not have to buy extra leads?
Each cable combines a 15-pin SATA power connector and a 7-pin SATA data connector into one 22-pin assembly, letting you power and transfer data to a drive without separate power or data cables.
Which version should I pick for a 6 Gbps SATA III drive?
The cable is rated for SATA III 6 Gbps and is backward compatible with SATA I and SATA II, so it will run at the full speed of any SATA drive you connect.
What does the 6 Gbps rating mean once the cable is installed in my PC?
It supports the maximum SATA III transfer rate of 6 Gbps; actual throughput will be limited by the drive and controller you attach.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



