We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic and metal adapter with a downward 90-degree 19-pin female connector on one side

BUCIER

BUCIER PH73B Down 90 Degree 19 Pin to USB 3.1 Type-E Adapter

SKU CH-AD6Q-CKJ38

Converts a motherboard USB 3.0 19-pin header to a down-angled USB 3.1 Type-E front-panel port for Type-C devices

  • Type19 Pin to Type E 3.1
  • Color1 Pack
  • Cable Lengthinches
  • Changer Type19 Pin to Type E 3.1
  • Specifications19 pin to type e 3.1 Adapters device
  • Connector A19 Pin to Type E 3.1
  • Down-90 degree angle fits tight rear-panel spaces
  • Converts 19/20-pin USB 3.0 header to USB 3.1 Type-E front port
  • Supports 5 Gbps data rate without speed conversion
  • Plastic-and-metal construction measures 2.5 cm by 2.4 cm by 1 cm
  • Plug-and-play on Windows, Mac and Linux systems

Down-Right 90° Adapter for Front Panel USB-C

The BUCIER PH73B converts a motherboard 19-pin or 20-pin USB 3.0 header into a USB 3.1 Type-E port that faces downward at a right angle. Builders fitting a Type-C front-panel connector into a tight PCI bracket space use this adapter to avoid cable strain and clearance problems.

Capacity and Speed Limits

The adapter passes only the USB 3.0 Gen1 signals present on the 19-pin header, so throughput stays at 5 Gbps and does not reach 10 Gbps. It cannot work with a USB 2.0 motherboard IDC connector, so systems lacking a 19-pin header cannot use it.

Mounting and Compatibility Notes

The plastic-and-metal body measures 2.5 cm by 2.4 cm by 1 cm and mounts on a PCI bracket for secure installation. Driver-free operation is supported on Windows XP through Windows 10, macOS and Linux, but power must be disconnected for 20 seconds before fitting to prevent pin shorting.

Highlights

  • Down-90 degree angle fits tight rear-panel spaces
  • Converts 19/20-pin USB 3.0 header to USB 3.1 Type-E front port
  • Supports 5 Gbps data rate without speed conversion
  • Plastic-and-metal construction measures 2.5 cm by 2.4 cm by 1 cm
  • Plug-and-play on Windows, Mac and Linux systems

Specifications

BrandAAOTOKK
Type19 Pin to Type E 3.1
Color1 Pack
Cable Lengthinches
Changer Type19 Pin to Type E 3.1
Specifications19 pin to type e 3.1 Adapters device
Connector A19 Pin to Type E 3.1
Connector B19 Pin to Type E 3.1

Questions about this item

Will the 90-degree down angle fit my existing PCI bracket without blocking adjacent slots?

The PH73B measures 2.5 cm by 2.4 cm and mounts to a standard PCI bracket with a 90-degree down orientation, leaving neighbouring slots clear.

How can I verify the adapter is delivering 5 Gbps after installation?

Connect a USB 3.0 Type-C device and check the operating system reports a 5 Gbps SuperSpeed link; the adapter does not increase speed beyond the motherboard's 19-pin Gen 1 limit.

Does the package include mounting screws or a bracket for the PCI slot?

The box contains one PH73B Down-90 degree adapter only; screws and a PCI bracket are not supplied and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.