We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 180mm PCIe 3.0 x4 riser cable with 180-degree right-angle female connector

BUCIER

BUCIER PCIE30-X4-180MM-0018D 180mm PCIe 3.0 X4 riser cable

SKU CH-97ZV-BEGQF

An 180 mm PCIe 3.0 x4 riser cable with a 64-pin female slot that accepts x1, x4, x8 or x16 cards and bends 180 degrees without signal loss

  • ColorBlack
  • PCIe 3.0 x4 delivers up to 4 GB/s theoretical bandwidth
  • 64-pin full-function design supports diverse PCIe cards like 2.5G boot or RAID
  • 180 mm length with 0-to-180-degree female slot fits x1/x4/x8/x16 cards
  • Tinned copper core with Teflon wrap and PVC coating stays flexible for tight bends
  • Plug-and-play installation in anti-static bag protects gold fingers from contamination

180 mm PCIe 3.0 x4 riser cable

This 180 mm PCIe 3.0 x4 riser cable extends a motherboard slot so that M.2, Wi-Fi, FireWire, USB or sound cards can be mounted away from the board. The 64-pin connector carries full x4 signalling and is backward compatible with PCIe 2.0 and 1.0 devices. Tinned copper conductors wrapped in Teflon and a PVC jacket keep the cable very flexible for tight routing.

Suits builders who need a right-angle extension

The 0-to-180-degree female socket accepts x1, x4, x8 or x16 cards, making it useful for small-form-factor cases, riser cages or custom brackets. It is not suited for hot-swap scenarios. Buyers who need a straight-through layout or a longer reach should look at other cable lengths or orientations.

4 GB/s theoretical maximum throughput

The link tops out at 4 GB/s theoretical bandwidth under the PCIe 3.0 x4 specification, so the cable will not bottleneck typical add-in cards such as capture devices, 2.5 GbE NICs or SSD RAID controllers. Actual throughput depends on the host slot and the card installed.

Highlights

  • PCIe 3.0 x4 delivers up to 4 GB/s theoretical bandwidth
  • 64-pin full-function design supports diverse PCIe cards like 2.5G boot or RAID
  • 180 mm length with 0-to-180-degree female slot fits x1/x4/x8/x16 cards
  • Tinned copper core with Teflon wrap and PVC coating stays flexible for tight bends
  • Plug-and-play installation in anti-static bag protects gold fingers from contamination

Specifications

BrandBUCIER
ModelPCIE30-X4-180MM-0018D
ColorBlack

Questions about this item

Will the PCIe 3.0 x4 link sustain its 4 GB/s theoretical speed under continuous load?

The cable is rated for PCIe 3.0 x4 with a theoretical maximum of 4 GB/s. Actual sustained throughput depends on the host slot, the installed card and system cooling.

Does the riser add noticeable heat or fan noise when a card runs all day?

The cable itself is passive and adds no active cooling or noise. Any heat or fan sound comes from the installed card and the host chassis airflow.

What slot type must my motherboard provide for this riser to work?

The male connector plugs into a PCIe x4, x8 or x16 slot on the motherboard. The female end accepts x1, x4, x8 or x16 cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.