We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 B-key slot and mSATA connector, two mounting screws included

BUCIER

BUCIER NGFF M.2 B Key to mSATA Adapter Card

SKU CH-ZJ4Q-6R018

Adapts an M.2 B‑Key SATA SSD to an mSATA slot with 6.0 Gb/s throughput

  • Converts mSATA SSDs to M.2 B Key slots
  • Connects NGFF B Key drives to mSATA motherboards
  • PCIe M.2 specification 1.0 compliant
  • SATA III specification compliant
  • Supports data transfer up to 6.0Gb/s

B-Key M.2 to mSATA Adapter

This adapter converts a B-Key M.2 SATA solid-state drive for use in an mSATA Mini PCI-E slot. It complies with the PCI Express M.2 specification 1.0 and the SATA III specification. The card supports data transfer up to 6.0Gb/s. Two mounting screws are included in the package.

Suits B-Key SATA M.2 drives only

Builders with a B-Key M.2 SATA SSD and an available mSATA motherboard slot can use this card. It is not suitable for M-Key modules or drives that require a PCIe interface. Buyers needing to connect an mSATA drive to an M.2 slot should look at a different adapter type.

PCIe M.2 spec 1.0 and SATA III compliance

The single specification that decides fit is the B-Key M.2 SATA interface combined with PCIe M.2 specification 1.0 and SATA III compliance. Only drives matching that exact interface will operate correctly at up to 6.0Gb/s.

Highlights

  • Converts mSATA SSDs to M.2 B Key slots
  • Connects NGFF B Key drives to mSATA motherboards
  • PCIe M.2 specification 1.0 compliant
  • SATA III specification compliant
  • Supports data transfer up to 6.0Gb/s

Specifications

BrandMustpoint
ModelNGFF M.2 B Key to MSATA Adapter Card

Questions about this item

What does the 6.0 Gb/s transfer rate mean when the adapter is installed?

It allows the connected mSATA SSD to run at full SATA III speed, so read and write performance matches the drive's own rating.

Which SATA standard does the adapter comply with and what does that cap?

It complies with SATA III, capping the link at 6.0 Gb/s regardless of the host controller.

What mounting hardware is needed to secure the card in a motherboard slot?

Two screws are included for fastening the adapter to the mSATA Mini PCI-E slot.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.