We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue Mini SAS HD SFF-8643 male to four SFF-8482 connectors with SATA power adapters, 3.3 ft length

BUCIER

BUCIER Mini SAS-012 SFF-8643 to 4× SFF-8482 SATA cable 3.3ft

SKU CH-KZ67-1RMPP

Connects a Mini SAS HD SFF-8643 host port to four SFF-8482 drives with integrated SATA power adapters, 3.3 ft length, 6 Gbps per drive

  • TypeMini-SAS Cables
  • ColorBlack/Blue
  • Length3.3
  • Speed6 gigabytes_per_second
  • ConductorCopper
  • Featuressff-8643 to sff-8482 sas breakout cable with sata power
  • Connects controller to four drives via SFF-8643 to SFF-8482 breakout
  • Delivers 6 Gbps per drive through copper conductors
  • Includes integrated SATA 7-pin data and 15-pin power adapters
  • 30 AWG thin cable enables flexible routing in tight cases
  • 3 ft length suits standard chassis layouts

SFF-8643 to 4× SFF-8482 breakout cable

This 3.3 ft cable splits a single Mini SAS HD SFF-8643 host port into four SFF-8482 target connectors, each with an integrated SATA 7-pin data and 15-pin power adapter. It connects a SAS HBA or RAID controller directly to up to four SATA or SAS hard drives or SSDs. The assembly uses 30 AWG copper conductors for a flexible internal routing.

Sustained 6 Gbps per drive over copper

Each of the four breakout legs supports a data transfer rate up to 6 Gbps, matching the SAS 3.0 link speed of the SFF-8643 host interface. The copper conductors maintain signal integrity across the full 1 metre length under continuous I/O workloads typical of RAID arrays or JBOD enclosures. No active components are present, so latency and throughput remain consistent without external power for the cable itself.

Replaces SFF-8087 or discrete SATA cables

This breakout replaces a legacy SFF-8087 to SATA fan-out or multiple individual SATA data and power cables when migrating to a controller with an SFF-8643 port. The jump is worthwhile when consolidating four drive connections into one controller port while retaining per-drive SATA power delivery. It is not suitable for connecting an SFF-8643 port to a backplane that expects a native SFF-8643 target, nor for use with SAS drives that require a direct SAS power source.

Highlights

  • Connects controller to four drives via SFF-8643 to SFF-8482 breakout
  • Delivers 6 Gbps per drive through copper conductors
  • Includes integrated SATA 7-pin data and 15-pin power adapters
  • 30 AWG thin cable enables flexible routing in tight cases
  • 3 ft length suits standard chassis layouts

Specifications

BrandADCAUDX
ModelMini SAS-012
TypeMini-SAS Cables
ColorBlack/Blue
Length3.3
Speed6 gigabytes_per_second
ConductorCopper
Featuressff-8643 to sff-8482 sas breakout cable with sata power

Questions about this item

Does the 30 AWG cable run warm when the SFF-8643 host link is saturated at 6 Gbps per drive?

The 30 AWG conductors are thin and flexible; sustained 6 Gbps per lane produces minimal heat rise in typical chassis airflow.

What power connectors must my power supply provide for the four SFF-8482 targets?

Each SFF-8482 breakout includes a SATA 15-pin power plug, so four free SATA power leads from the PSU are required.

Will this SFF-8643 to SFF-8482 breakout work with an older SFF-8087 HBA?

No; the host connector is SFF-8643 male, which is physically and electrically different from SFF-8087.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.