We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with gold edge connector and white 40-pin ZIF socket

BUCIER

BUCIER Mini PCI-E mSATA to 40Pin ZIF Adapter Card

SKU CH-0J1F-Z3068

Converts a Mini PCI-E mSATA SSD to a 40-pin ZIF interface with no capacity limit

  • Connect legacy ZIF drives via standard CE interface
  • Install any capacity mini SATA SSD without size limits
  • Compact 62.6mm x 35.2mm form factor fits tight spaces
  • Works with DOS, Windows 3.1, 98SE, Me, 2000, XP, Vista, Unix, Linux
  • Supports Intel standard mini SATA SSD interface

Mini PCI-E mSATA to 40Pin ZIF Adapter

This adapter card converts a Mini PCI-E mSATA solid-state drive to a 40-pin ZIF interface. It provides a standard ZIF CE connection for compatible host devices. The compact board measures 62.6mm by 35.2mm and fits into tight internal spaces.

Suits legacy system upgrades

Builders restoring or upgrading older laptops and embedded systems that use a 40-pin ZIF drive socket will find this card useful. It supports Intel-standard mini SATA SSDs with no capacity limitation on the installed drive. Buyers needing a SATA cable connection or a different pin count should look elsewhere.

ZIF CE interface standard

The card implements a standard ZIF CE interface for the 40-pin connector. Compatibility is listed for DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Unix and Linux operating systems. One adapter card is included in the package.

Highlights

  • Connect legacy ZIF drives via standard CE interface
  • Install any capacity mini SATA SSD without size limits
  • Compact 62.6mm x 35.2mm form factor fits tight spaces
  • Works with DOS, Windows 3.1, 98SE, Me, 2000, XP, Vista, Unix, Linux
  • Supports Intel standard mini SATA SSD interface

Specifications

BrandMustpoint

Questions about this item

How do I install the Mini PCI-E mSATA SSD into the 40-pin ZIF adapter without damaging the connector?

Align the mSATA SSD with the Mini PCI-E slot, press firmly until seated, then connect the 40-pin ZIF cable by lifting the latch, inserting the ribbon contacts-down, and closing the latch securely.

Will the ZIF ribbon cable or latch need replacement after repeated drive swaps?

The ZIF latch is rated for limited cycles; avoid frequent opening and closing. Replace the ribbon cable if the conductors show wear or the latch no longer holds firmly.

At what point does the 62.6 mm by 35.2 mm board size limit installation in tight chassis?

The adapter requires a clear area of at least 62.6 mm by 35.2 mm plus cable bend radius; verify chassis clearance before purchase.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.